ContainerImage.Pinniped/2021-06-02-first-ldap-release.md at a27a3550715e20249c5020aa5e606326bfbf28bd

djpbessems/ContainerImage.Pinniped

Fork 0

Benjamin A. Petersen e5e8c13f23

blog: impersonation-proxy spelling, grammar

2023-08-15 11:37:11 -04:00

11 KiB

Raw Blame History

title

slug

date

author

image

excerpt

Support for LDAP Identities in the Pinniped Supervisor

Pinniped is made up of three main components:

The Pinniped [Concierge]({{< ref "docs/howto/install-concierge.md" >}}) component implements cluster-level authentication.
The Pinniped [Supervisor]({{< ref "docs/howto/install-supervisor.md" >}}) component implements authentication federation across lots of clusters, which each run the Concierge, and makes it easy to bring your own identities using any OIDC or LDAP provider.
The pinniped [CLI]({{< ref "docs/howto/install-cli.md" >}}) acts as an authentication plugin to kubectl.

The new LDAP support lives in the Supervisor component, along with enhancements to the CLI.

Why LDAP? And why now?

From the start, the Pinniped Supervisor has supported getting your identities from OIDC Providers. This was a strategic decision for the project, and was made for three reasons:

OIDC is an established standard with good security properties
Many modern identity systems commonly used by enterprises implement OIDC, making it immediately useful for many Pinniped users
Other open source projects, such as Dex and UAA, can act as a shim between OIDC and many other identity systems, and can provide a bridge between Pinniped and LDAP

This strategy has served us well for the initial launch of Pinniped to make it maximally useful for a minimal amount of code.

Although LDAP is a legacy identity protocol, and it is likely that nobody loves LDAP, the reality seems to be that a lot of enterprises keep using it anyway. Luckily, these other technologies could bridge LDAP into earlier versions of Pinniped for us.

At this point you may be asking yourself: since other systems can be used as a shim between Pinniped and an LDAP provider, then why would Pinniped ever need to provide direct support for LDAP providers? Good question. One of our goals is to make Kubernetes authentication as flexible and easy to use as possible. While some of the available identity shims are feature-rich technologies, they are not necessarily easy to configure. Also, their deployment, initial configuration, and day-two reconfiguration are not necessarily accomplished in a Kubernetes-native style using K8s APIs.

We felt it was worth the effort of building native LDAP support in order to reduce the number of moving parts in your authentication system and to simplify the configuration of integrating your LDAP identity providers with Pinniped. Although we contemplated including this feature from the beginning, we waited until we had other higher priority features in place before prioritizing this effort.

What about Active Directory's LDAP?

This release includes support for generic LDAP providers. When configured correctly for your provider, it should work with any LDAP provider.

We recognize that legacy Active Directory systems are probably one of the most popular LDAP providers.

However, for this first release we have not specifically tested with Microsoft Active Directory. Our generic LDAP implementation should work with Active Directory too. We intend to add features in future releases to make it more convenient to integrate with Microsoft Active Directory as an LDAP provider, and to include AD in our automated testing suite. Stay tuned.

In the meantime, please let us know if you run into any issues or concerns using your LDAP system. Feel free to ask questions via #pinniped on Kubernetes Slack, or create an issue on our Github repository.

Security Considerations

LDAP is inherently less secure than OIDC in one important way. In an OIDC login flow, your account credentials are only handled by your web browser, which you generally trust, and by the OIDC provider itself. The Pinniped CLI and Pinniped server-side components never handle your credentials. Unfortunately, LDAP does not work that way. LDAP authentication requires that the client send the user's password on behalf of the user. This means that the Pinniped CLI and the Pinniped Supervisor both see your LDAP password. If you have the choice between using an OIDC provider or an LDAP provider as your source of identity, then you might want to lean toward the OIDC provider for this reason.

We've taken care to always use TLS encrypted communication channels between the CLI and the Supervisor and between the Supervisor and the LDAP provider. We've also taken care to never log your password or write it to any storage. The Supervisor is already a privileged component in your chain of trust in the sense that if it were compromised by a bad actor, all of your clusters which are trusting it to provide authentication would therefore also become vulnerable to intrusion. While in an ideal world we would prefer that no components handled your LDAP password, at least the credential is only handled by components which are already assumed to be trusted.

Other clusters running the Concierge will never see your LDAP password. The Supervisor authenticates your users with the LDAP provider, and then the Supervisor issues unique, short-lived, per-cluster tokens. These are the only credentials transmitted to the clusters running the Concierge for authentication. Each token is only accepted by its target cluster, so a token somehow stolen from one cluster has no value on other clusters. This limits the impact of a compromise on one of those clusters.

You might notice that we have not implemented an API to configure LDAP as an identity provider directly in the Concierge component, without requiring use of the Supervisor component. We may add this in the future, although it would be less secure for the reasons described above. The reason that we would consider adding it would be for use cases where you are configuring authentication only for one or a very small number of clusters, and you don't feel like incurring the overhead of running a Supervisor such as configuring ingress, TLS certs, and usually a DNS entry. (Interested in having this feature? Reach out and let us know!) Having the Concierge directly talk to the LDAP provider would imply that users would be handing their LDAP passwords directly to the Concierge. If a bad actor were able to compromise that cluster as an admin-level user, then they might interfere with the Concierge software on that cluster to find a way to see your password. Once they have your password they could access other clusters, and even other unrelated systems which are also using LDAP authentication. As a design consideration in Pinniped, we generally consider clusters to be untrustworthy to reduce the impact of a successful attack on a cluster.

As an aside, this is a good time to remind you that whether you use OIDC or LDAP identity providers, it is important to keep the Supervisor secure. We recommend running the Supervisor on a separate cluster, or a cluster that you use to only run other similar security-sensitive components, which is appropriately secured and accessible to the fewest number of users as possible. It is also important to ensure that your users are installing the authentic versions of the kubectl and pinniped CLI tools. And it is important that your users are using authentic kubeconfig files handed out by a trusted source.

How to use LDAP with your Pinniped Supervisor

Once you have [installed]({{< ref "docs/howto/install-supervisor.md" >}}) and [configured]({{< ref "docs/howto/supervisor/configure-supervisor.md" >}}) the Supervisor, adding an LDAP provider is as easy as creating an LDAPIdentityProvider resource.

We've provided examples of using [OpenLDAP]({{< ref "docs/howto/install-supervisor.md" >}}) and [JumpCloud]({{< ref "docs/howto/install-supervisor.md" >}}) as LDAP providers. Stay tuned for examples of using Active Directory.

The pinniped CLI has also been enhanced to support LDAP authentication. Now when pinniped get kubectl sees that your cluster's Concierge is configured to use a Supervisor which has an LDAPIdentityProvider, then it will emit the appropriate kubeconfig to enable LDAP logins. When that kubeconfig is used with kubectl, the Pinniped plugin will directly prompt the user on the CLI for their LDAP username and password and securely transmit them to the Supervisor for authentication.

What about SAML?

Now that we support OIDC and LDAP identity providers, the obvious next question is whether we should also support the third big enterprise authentication protocol: SAML.

We are currently undecided about the value of offering direct support for SAML. The protocol is complex and difficult to implement without mistakes or vulnerabilities in dependencies. Additionally, SAML seems to be waning in popularity in favor of OIDC, which provides a similar end-user experience.

What do you think? Do you still use SAML in your enterprise? Do you need SAML for authentication into your Kubernetes clusters? Let us know!

Community contributors

The Pinniped community continues to grow, and is a vital part of the project's success. This release includes important feedback and contributions from community user @jeuniii. Thank you for helping improve Pinniped!

We thrive on community feedback. Did you try our new LDAP features? What else do you need from identity systems for your Kubernetes clusters?

Find us in #pinniped on Kubernetes Slack, create an issue on our Github repository, or start a Discussion.

Thanks for reading our announcement!

11 KiB Raw Blame History Unescape Escape