See comment. This is at least a first step to make our GKE acceptance
environment greener. Previously, this test assumed that the Pinniped-under-test
had been deployed in (roughly) the last 10 minutes, which is not an assumption
that we make anywhere else in the integration test suite.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Only sync on add/update of secrets in the same namespace which
have the "storage.pinniped.dev/garbage-collect-after" annotation, and
also during a full resync of the informer whenever secrets in the
same namespace with that annotation exist.
- Ignore deleted secrets to avoid having this controller trigger itself
unnecessarily when it deletes a secret. This controller is never
interested in deleted secrets, since its only job is to delete
existing secrets.
- No change to the self-imposed rate limit logic. That still applies
because secrets with this annotation will be created and updated
regularly while the system is running (not just during rare system
configuration steps).
This is a bit more clear. We're changing this now because it is a non-backwards-compatible change that we can make now since none of this RFC8693 token exchange stuff has been released yet.
There is also a small typo fix in some flag usages (s/RF8693/RFC8693/)
Signed-off-by: Matt Moyer <moyerm@vmware.com>
It would be great to do this for the supervisor's callback endpoint as well, but it's difficult to get at those since the request happens inside the spawned browser.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This reverts commit be4e34d0c0.
Roll back this change that was supposed to make the test more robust. If we
retry multiple token exchanges with the same auth code, of course we are going
to get failures on the second try onwards because the auth code was invalidated
on the first try.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
It now tests both the deprecated `pinniped get-kubeconfig` and the new `pinniped get kubeconfig --static-token` flows.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is extracted from library.NewClientsetForKubeConfig(). It is useful so you can assert properties of the loaded, parsed kubeconfig.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I hope this will make TestSupervisorLogin less flaky. There are some instances
where the front half of the OIDC login flow happens so fast that the JWKS
controller doesn't have time to properly generate an asymmetric key.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
I saw this message in our CI logs, which led me to this fix.
could not update status: OIDCProvider.config.supervisor.pinniped.dev "acceptance-provider" is invalid: status.status: Unsupported value: "SameIssuerHostMustUseSameSecret": supported values: "Success", "Duplicate", "Invalid"
Also - correct an integration test error message that was misleading.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
We believe this API is more forwards compatible with future secrets management
use cases. The implementation is a cry for help, but I was trying to follow the
previously established pattern of encapsulating the secret generation
functionality to a single group of packages.
This commit makes a breaking change to the current OIDCProvider API, but that
OIDCProvider API was added after the latest release, so it is technically still
in development until we release, and therefore we can continue to thrash on it.
I also took this opportunity to make some things private that didn't need to be
public.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This forced us to add labels to the CSRF cookie secret, just as we do
for other Supervisor secrets. Yay tests.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Also add more log statements to the controller
- Also have the controller apply a rate limit to itself, to avoid
having a very chatty controller that runs way more often than is
needed.
- Also add an integration test for the controller's behavior.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- This struct represents the configuration of all timeouts. These
timeouts are all interrelated to declare them all in one place.
This should also make it easier to allow the user to override
our defaults if we would like to implement such a feature in the
future.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
`token_endpoint_auth_signing_alg_values_supported` is only related to
private_key_jwt and client_secret_jwt client authentication methods
at the token endpoint, which we do not support. See
https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderMetadata
for more details.
Signed-off-by: Aram Price <pricear@vmware.com>
We decided that we don't really need these in every case, since we'll be returning username and groups in a custom claim.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We are currently using EC keys to sign ID tokens, so we should reflect that in
our OIDC discovery metadata.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This fixes a regression introduced by 24c4bc0dd4. It could occasionally cause the tests to fail when run on a machine with an IPv6 localhost interface. As a fix I added a wrapper for the new Go 1.15 `LookupIP()` method, and created a partially-functional backport for Go 1.14. This should be easy to delete in the future.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This adds a few new "create test object" helpers and extends `CreateTestOIDCProvider()` to optionally wait for the created OIDCProvider to enter some expected status condition.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Note that this WIP commit includes a failing unit test, which will
be addressed in the next commit
Signed-off-by: Ryan Richard <richardry@vmware.com>
Mainly, avoid using some `testing` helpers that were added in 1.14, as well as a couple of other niceties we can live without.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were assuming that env.SupervisorHTTPAddress was set, but it might not be
depending on the environment on which the integration tests are being run. For
example, in our acceptance environments, we don't currently set
env.SupervisorHTTPAddress.
I tried to follow the pattern from TestSupervisorOIDCDiscovery here.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Prior to this we re-used the CLI testing client to test the authorize flow of the supervisor, but they really need to be separate upstream clients. For example, the supervisor client should be a non-public client with a client secret and a different callback endpoint.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This will allow it to be imported by Go code outside of our repository, which was something we have planned for since this code was written.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Before, we did this in an init container, which meant if the Dex pod restarted we would have fresh certs, but our Tilt/bash setup didn't account for this.
Now, the certs are generated by a Job which runs once and saves the generated files into a Secret. This should be a bit more stable.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change deploys a small Squid-based proxy into the `dex` namespace in our integration test environment. This lets us use the cluster-local DNS name (`http://dex.dex.svc.cluster.local/dex`) as the OIDC issuer. It will make generating certificates easier, and most importantly it will mean that our CLI can see Dex at the same name/URL as the supervisor running inside the cluster.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We want to have our APIs respond to `kubectl get pinniped`, and we shouldn't use `all` because we don't think most average users should have permission to see our API types, which means if we put our types there, they would get an error from `kubectl get all`.
I also added some tests to assert these properties on all `*.pinniped.dev` API resources.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I tried to follow a principle of encapsulation here - we can still default to
peeps making connections to 80/443 on a Service object, but internally we will
use 8080/8443.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This is the first of a few related changes that re-organize our API after the big recent changes that introduced the supervisor component.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Setting a Secret in the supervisor's namespace with a special name
will cause it to get picked up and served as the supervisor's TLS
cert for any request which does not have a matching SNI cert.
- This is especially useful for when there is no DNS record for an
issuer and the user will be accessing it via IP address. This
is not how we would expect it to be used in production, but it
might be useful for other cases.
- Includes a new integration test
- Also suppress all of the warnings about ignoring the error returned by
Close() in lines like `defer x.Close()` to make GoLand happier
Based on our experiences today with GKE, it will be easier for our users
to configure Ingress health checks if the healthz endpoint is available
on the same public port as the OIDC endpoints.
Also add an integration test for the healthz endpoint now that it is
public.
Also add the optional `containers[].ports.containerPort` to the
supervisor Deployment because the GKE docs say that GKE will look
at that field while inferring how to invoke the health endpoint. See
https://cloud.google.com/kubernetes-engine/docs/concepts/ingress#def_inf_hc
- Not used by any of our integration test clusters yet
- Planning to use it later for the kind clusters and maybe for
the acceptance clusters too (although the acceptance clusters might
not need to use self-signed certs so maybe not)
- It didn't matter before because it would be cleaned up by a
t.Cleanup() function, but now that we might loop twice it will matter
during the second time through the loop
EC keys are smaller and take less time to generate. Our integration
tests were super flakey because generating an RSA key would take up to
10 seconds *gasp*. The main token verifier that we care about is
Kubernetes, which supports P256, so hopefully it won't be that much of
an issue that our default signing key type is EC. The OIDC spec seems
kinda squirmy when it comes to using non-RSA signing algorithms...
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
I brought this over because I copied code from work in flight on
another branch. But now the other branch doesn't use this package.
No use bringing on another dependency if we can avoid it.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This will be used for other types of "capabilities" of the test environment besides just those of the test cluster, such as those of an upstream OIDC provider.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Also continue renaming things related to the concierge app
- Enhance the uninstall test to also test uninstalling the supervisor
and local-user-authenticator apps
- Variables specific to concierge add it to their name
- All variables now start with `PINNIPED_TEST_` which makes it clear
that they are for tests and also helps them not conflict with the
env vars that are used in the Pinniped CLI code
- The OIDCProviderConfigWatcherController synchronizes the
OIDCProviderConfig settings to dynamically mount and unmount the
OIDC discovery endpoints for each provider
- Integration test passes but unit tests need to be added still
- Intended to be a red test in this commit; will make it go
green in a future commit
- Enhance env.go and prepare-for-integration-tests.sh to make it
possible to write integration tests for the supervisor app
by setting more env vars and by exposing the service to the kind
host on a localhost port
- Add `--clean` option to prepare-for-integration-tests.sh
to make it easier to start fresh
- Make prepare-for-integration-tests.sh advise you to run
`go test -v -count 1 ./test/integration` because this does
not buffer the test output
- Make concierge_api_discovery_test.go pass by adding expectations
for the new OIDCProviderConfig type
This will hopefully come in handy later if we ever decide to add
support for multiple OIDC providers as a part of one supervisor.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
I saw this helper function the other day and wondered if we could use it.
It does indeed look like it does what we want, because when I run this code,
I get `...User "system:anonymous" cannot get resource...`.
c := library.NewAnonymousPinnipedClientset(t)
_, err := c.
ConfigV1alpha1().
CredentialIssuerConfigs("integration").
Get(context.Background(), "pinniped-config", metav1.GetOptions{})
t.Log(err)
I also ran a similar test using this new helper in the context of
library.NewClientsetWithCertAndKey(). Seemed to get us what we want.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This change replaces our previous test helpers for checking cluster capabilities and passing external test parameters. Prior to this change, we always used `$PINNIPED_*` environment variables and these variables were accessed throughout the test code.
The new code introduces a more strongly-typed `TestEnv` structure and helpers which load and expose the parameters. Tests can now call `env := library.IntegrationEnv(t)`, then access parameters such as `env.Namespace` or `env.TestUser.Token`. This should make this data dependency easier to manage and refactor in the future. In many ways this is just an extended version of the previous cluster capabilities YAML.
Tests can also check for cluster capabilities easily by using `env := library.IntegrationEnv(t).WithCapability(xyz)`.
The actual parameters are still loaded from OS environment variables by default (for compatibility), but the code now also tries to load the data from a Kubernetes Secret (`integration/pinniped-test-env` by default). I'm hoping this will be a more convenient way to pass data between various scripts than the local `/tmp` directory. I hope to remove the OS environment code in a future commit.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This seems to fail on CI when the Concourse workers get slow and
kind stops working reliably. It would be interesting to see the
error message in that case to figure out if there's anything we
could do to make the test more resilient.
Simplifies the implementation, makes it more consistent with other
updaters of the cic (CredentialIssuerConfig), and also retries on
update conflicts
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Only inject things through the constructor that the controller
will need
- Use pkg private constants when possible for things that are not
actually configurable by the user
- Make the agent pod template private to the pkg
- Introduce a test helper to reduce some duplicated test code
- Remove some `it.Focus` lines that were accidentally committed, and
repair the broken tests that they were hiding
- Lots of TODOs added that need to be resolved to finish this WIP
- execer_test.go seems like it should be passing, but it fails (sigh)
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Annotations do not have this restriction, so we can put it there instead. This only currently occurs on clusters without the cluster signing capability (GKE).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
New resource naming conventions:
- Do not repeat the Kind in the name,
e.g. do not call it foo-cluster-role-binding, just call it foo
- Names will generally start with a prefix to identify our component,
so when a user lists all objects of that kind, they can tell to which
component it is related,
e.g. `kubectl get configmaps` would list one named "pinniped-config"
- It should be possible for an operator to make the word "pinniped"
mostly disappear if they choose, by specifying the app_name in
values.yaml, to the extent that is practical (but not from APIService
names because those are hardcoded in golang)
- Each role/clusterrole and its corresponding binding have the same name
- Pinniped resource names that must be known by the server golang code
are passed to the code at run time via ConfigMap, rather than
hardcoded in the golang code. This also allows them to be prepended
with the app_name from values.yaml while creating the ConfigMap.
- Since the CLI `get-kubeconfig` command cannot guess the name of the
CredentialIssuerConfig resource in advance anymore, it lists all
CredentialIssuerConfig in the app's namespace and returns an error
if there is not exactly one found, and then uses that one regardless
of its name
I also started updating the script to deploy the test-webhook instead of
doing TMC stuff. I think the script should live in this repo so that
Pinniped contributors only need to worry about one repo for running
integration tests.
There are a bunch of TODOs in the script, but I figured this was a good
checkpoint. The script successfully runs on my machine and sets up the
test-webhook and pinniped on a local kind cluster. The integration tests
are failing because of some issue with pinniped talking to the test-webhook,
but this is step in the right direction.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
It looks like requests to our aggregated API service on GKE vacillate
between success and failure until they reach a converged successful
state. I think this has to do with our pods updating the API serving
cert at different times. If only one pod updates its serving cert to
the correct value, then it should respond with success. However, the
other pod would respond with failure. Depending on the load balancing
algorithm that GKE uses to send traffic to pods in a service, we could
end up with a success that we interpret as "all pods have rotated
their certs" when it really just means "at least one pod has rotated
its certs."
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This should simplify our build/test setup quite a bit, since it means we have only a single module (at the top level) with all hand-written code. I'll leave `module.sh` alone for now but we may be able to simplify that a bit more.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were using this at one point to control which tests ran with `go test ./...`, but now we're also using the `-short` flag to differentiate unit vs. integration tests.
Hopefully this will simplify things a bit.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
kubectl pulls these in in their main package...I wonder if we should do
the same for our main packages?
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Controller and aggregated API server are allowed to run
- Keep retrying to borrow the cluster signing key in case the failure
to get it was caused by a transient failure
- The CredentialRequest endpoint will always return an authentication
failure as long as the cluster signing key cannot be borrowed
- Update which integration tests are skipped to reflect what should
and should not work based on the cluster's capability under this
new behavior
- Move CreateOrUpdateCredentialIssuerConfig() and related methods
to their own file
- Update the CredentialIssuerConfig's Status every time we try to
refresh the cluster signing key
- Indicate the success or failure of the cluster signing key strategy
- Also introduce the concept of "capabilities" of an integration test
cluster to allow the integration tests to be run against clusters
that do or don't allow the borrowing of the cluster signing key
- Tests that are not expected to pass on clusters that lack the
borrowing of the signing key capability are now ignored by
calling the new library.SkipUnlessClusterHasCapability test helper
- Rename library.Getenv to library.GetEnv
- Add copyrights where they were missing
Didn't fix CI. I didn't think it would.
I have never seen the integration tests fail like this locally, so I
have to imagine the failure has something to do with the environment
on which we are testing.
This reverts commit ba2e2f509a.
We are getting these weird flakes in CI where the kube client that we
create with these helper functions doesn't work against the kube API.
The kube API tells us that we are unauthorized (401). Seems like something
is wrong with the keypair itself, but when I create a one-off kubeconfig
with the keypair, I get 200s from the API. Hmmm...I wonder what CI will
think of this change?
I also tried to align some naming in this package.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
These configuration knobs are much more human-understandable than the
previous percentage-based threshold flag.
We now allow users to set the lifetime of the serving cert via a ConfigMap.
Previously this was hardcoded to 1 year.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
The rotation is forced by a new controller that deletes the serving cert
secret, as other controllers will see this deletion and ensure that a new
serving cert is created.
Note that the integration tests now have an addition worst case runtime of
60 seconds. This is because of the way that the aggregated API server code
reloads certificates. We will fix this in a future story. Then, the
integration tests should hopefully get much faster.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This switches us back to an approach where we use the Pod "exec" API to grab the keys we need, rather than forcing our code to run on the control plane node. It will help us fail gracefully (or dynamically switch to alternate implementations) when the cluster is not self-hosted.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
- It would sometimes fail with this error:
namespaces is forbidden: User "tanzu-user-authentication@groups.vmware.com"
cannot list resource "namespaces" in API group "" at the cluster scope
- Seems like it was because the RBAC rule added by the test needs a
moment before it starts to take effect, so change the test to retry
the API until it succeeds or fail after 3 seconds of trying.
- We want to follow the <noun>Request convention.
- The actual operation does not login a user, but it does retrieve a
credential with which they can login.
- This commit includes changes to all LoginRequest-related symbols and
constants to try to update their names to follow the new
CredentialRequest type.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
As discussed in API review, this field exists for convenience right
now. Since the username/groups are encoded in the Credential sent in
the LoginRequestStatus, the client still has access to their
user/groups information. We want to remove this for now to be
conservative and limit our API surface area (smaller surface area =
less to maintain). We can always add this back in the future.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- When we call the LoginRequest endpoint in loginrequest_test.go,
do it with an unauthenticated client, to make sure that endpoint works
with unauthenticated clients.
- For tests which want to test using certs returned by LoginRequest to
make API calls back to kube to check if those certs are working, make
sure they start with a bare client and then add only those certs.
Avoid accidentally picking up other kubeconfig configuration like
tokens, etc.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- For high availability reasons, we would like our app to scale linearly
with the size of the control plane. Using a DaemonSet allows us to run
one pod on each node-role.kubernetes.io/master node.
- The hope is that the Service that we create should load balance
between these pods appropriately.
- Add integration test for serving cert auto-generation and rotation
- Add unit test for `WithInitialEvent` of the cert manager controller
- Move UpdateAPIService() into the `apicerts` package, since that is
the only user of the function.
I suppose we could solve this other ways, but this utility was
only used in one place right now, so it is easiest to copy it over.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Instead, make the integration tests a separate module. You can't run
these tests by accident because they will not run at all when you
`go test` from the top-level directory. You will need to `cd test`
before using `go test` in order to run the integration tests.
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Why? Because the discovery URL is already there in the kubeconfig; let's
not make our lives more complicated by passing it in via an env var.
- Also allow for ytt callers to not specify data.values.discovery_url - there
are going to be a non-trivial number of installers of placeholder-name
that want to use the server URL found in the cluster-info ConfigMap.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Seems like the next step is to allow override of the CA bundle; I didn't
do that here for simplicity of the commit, but seems like it is the right
thing to do in the future.
- Also includes bumping the api and client-go dependencies to the newer
version which also moved LoginDiscoveryConfig to the
crds.placeholder.suzerain-io.github.io group in the generated code
It turns out these fields are not meant to be base64 encoded, even though that's how they are in the kubeconfig.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Dynamically grant RBAC permission to the test user to allow them
to make read requests via the API
- Then use the credential returned from the LoginRequest to make a
request back to the API server which should be successful
Add initial aggregated API server (squashed from a bunch of commits).
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Aram Price <pricear@vmware.com>
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Trying to use "placeholder-name" or "placeholder_name" everywhere
that should later be changed to the actual name of the product,
so we can just do a simple search and replace when we have a name.
