The `require.Eventually()` function runs the body of the check in a separate goroutine, so it's not safe to use other `require` assertions as we did here. Our `library.RequireEventuallyWithoutError()` function does not spawn a goroutine, so it's safer to use here.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
The LastUpdateTime is no longer updated on every resync. It only changes if the underlying status has changed, so that it effectively shows when the transition happened.
This change happened in ab750f48aa, but we missed this test. It only fails when it has been more than ten minutes since the CredentialIssuer transitioned into a healthy state, but that can happen in our long-running CI environments.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This test felt overly complex and some of the cleanup logic wasn't 100% correct (it didn't clean up in all cases).
The new code is essentially the same flow but hopefully easier to read.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We see that occasionally kubectl returns 11 lines (probably related to https://github.com/kubernetes/kubernetes/issues/72628).
This test doesn't need to be so picky, so now it allows +/- one line from the expected count.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We had this one test that mutated the CredentialIssuer, which could cause the impersonation proxy to blip on one or both of the running concierge pods. This would sometimes break other concurrently running tests.
Instead, this bit of code is split into a separate non-concurrent test.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
The new version has different behavior for the `nonce` claim, which is now omitted if it would be empty (see https://github.com/ory/fosite/pull/570).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is to allow the use of binary LDAP entry attributes as the UID.
For example, a user might like to configure AD’s objectGUID or maybe
objectSid attributes as the UID attribute.
This negatively impacts the readability of the UID when it did not come
from a binary value, but we're considering this an okay trade-off to
keep things simple for now. In the future, we may offer more
customizable encoding options for binary attributes.
These UIDs are currently only used in the downstream OIDC `sub` claim.
They do not effect the user's identity on the Kubernetes cluster,
which is only based on their mapped username and group memberships from
the upstream identity provider. We are not currently supporting any
special encoding for those username and group name LDAP attributes, so
their values in the LDAP entry must be ASCII or UTF-8 in order for them
to be interpreted correctly.
This test setup should tolerate when the TokenCredentialRequest API isn't quite ready to authenticate the user or issue a cert.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This check is no longer valid, because there can be ephemeral, recoverable errors that show as ErrorDuringSetup.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- This enhances our LDAP client code to make it possible to optionally
dial an LDAP server without TLS and then use StartTLS to upgrade
the connection to TLS.
- The controller for LDAPIdentityProviders is not using this option
yet. That will come in a future commit.
Previously, our controllers would automatically create a CredentialIssuer with a singleton name. The helpers we had for this also used "raw" client access and did not take advantage of the informer cache pattern.
With this change, the CredentialIssuer is always created at install time in the ytt YAML. The controllers now only update the existing CredentialIssuer status, and they do so using the informer cache as much as possible.
This change is targeted at only the kubecertagent controller to start. The impersonatorconfig controller will be updated in a following PR along with other changes.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- For testing purposes, we would like to ensure that when we connect
to the LDAP server we cannot accidentally avoid using TLS or StartTLS.
- Also enabled the openldap `memberOf` overlay in case we want to
support group search using `memberOf` in the future.
- This required changes to the docker.io/bitnami/openldap container
image, so we're using our own fork for now. Will submit a PR to
bitnami/openldap to see if they will accept it (or something similar)
upstream.
Reflect the upstream group membership into the Supervisor's
downstream tokens, so they can be added to the user's
identity on the workload clusters.
LDAP group search is configurable on the
LDAPIdentityProvider resource.
See RFC6648 which asks that people stop using `X-` on header names.
Also Matt preferred not mentioning "IDP" in the header name.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change makes it easier to understand misconfigurations caused
by issuers with extraneous trailing slashes.
Signed-off-by: Mo Khan <mok@vmware.com>
The admin kubeconfigs we have on EKS clusters are a bit different from others, because there is no certificate/key (EKS does not use certificate auth).
This code didn't quite work correctly in that case. The fix is to allow the case where `tlsConfig.GetClientCertificate` is non-nil, but returns a value with no certificates.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
The supervisor treats all events the same hence it must use a
singleton queue.
Updated the integration test to remove the data race caused by
calling methods on testing.T outside of the main test go routine.
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the impersonator logic to pass through requests
that authenticated via a bearer token that asserts a UID. This
allows us to support service account tokens (as well as any other
form of token based authentication).
Signed-off-by: Monis Khan <mok@vmware.com>
This controller is responsible for cleaning up kube-cert-agent pods that were deployed by previous versions.
They are easily identified because they use a different `kube-cert-agent.pinniped.dev` label compared to the new agent pods (`true` vs. `v2`).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is a relatively large rewrite of much of the kube-cert-agent controllers. Instead of managing raw Pod objects, they now create a single Deployment and let the builtin k8s controller handle it from there.
This reduces the amount of code we need and should handle a number of edge cases better, especially those where a Pod becomes "wedged" and needs to be recreated.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Make PINNIPED_TEST_LDAP_LDAPS_CA_BUNDLE optional for integration tests
- When there is no CA bundle provided, be careful to use nil instead of
an empty bundle, because nil means to use the OS defaults
Now that we have the fix from https://github.com/kubernetes/kubernetes/pull/97693, we no longer need these sleeps.
The underlying authenticator initialization is still asynchronous, but should happen within a few milliseconds.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change updates the impersonator logic to use the delegated
authorizer for all non-rest verbs such as impersonate. This allows
it to correctly perform authorization checks for incoming requests
that set impersonation headers while not performing unnecessary
checks that are already handled by KAS.
The audit layer is enabled to track the original user who made the
request. This information is then included in a reserved extra
field original-user-info.impersonation-proxy.concierge.pinniped.dev
as a JSON blob.
Signed-off-by: Monis Khan <mok@vmware.com>
Also force the LDAP server pod to restart whenever the LDIF file
changes, so whenever you redeploy the tools deployment with a new test
user password the server will be updated.
Avoid them because they can't be used in GoLand for running integration
tests in the UI, like running in the debugger.
Also adds optional PINNIPED_TEST_TOOLS_NAMESPACE because we need it
on the LDAP feature branch where we are developing the upcoming LDAP
support for the Supervisor.
- Bad usernames and passwords aren't really errors, since they are
based on end-user input.
- Other kinds of authentication failures are caused by bad configuration
so still treat those as errors.
- Empty usernames and passwords are already prevented by our endpoint
handler, but just to be safe make sure they cause errors inside the
authenticator too.
- The unit tests for upstreamldap.Provider need to mock the LDAP server,
so add an integration test which allows us to get fast feedback for
this code against a real LDAP server.
- Automatically wrap the user search filter in parenthesis if it is not
already wrapped in parens.
- More special handling for using "dn" as the username or UID attribute
name.
- Also added some more comments to types_ldapidentityprovider.go.tmpl
- Add some fields to LDAPIdentityProvider that we will need to be able
to search for users during login
- Enhance TestSupervisorLogin to test logging in using an upstream LDAP
identity provider. Part of this new test is skipped for now because
we haven't written the corresponding production code to make it
pass yet.
- Some refactoring and enhancement to env.go and the corresponding env
vars to support the new upstream LDAP provider integration tests.
- Use docker.io/bitnami/openldap for our test LDAP server instead of our
own fork now that they have fixed the bug that we reported.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
The goal here was to start on an integration test to get us closer to the red
test that we want so we can start working on LDAP.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
