Kube 1.23 introduced a new field on the OIDC Authenticator which
allows us to pass in a client with our own TLS config. See
https://github.com/kubernetes/kubernetes/pull/106141.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
Go 1.18.1 started using MacOS' x509 verification APIs on Macs
rather than Go's own. The error messages are different.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- Two of the linters changed their names
- Updated code and nolint comments to make all linters pass with 1.44.2
- Added a new hack/install-linter.sh script to help developers install
the expected version of the linter for local development
When the LDAP and AD IDP watcher controllers encountered an update error
while trying to update the status conditions of the IDP resources, then
they would drop the computed desired new value of the condition on the
ground. Next time the controller ran it would not try to update the
condition again because it wants to use the cached settings and had
already forgotten the desired new value of the condition computed during
the previous run of the controller. This would leave the outdated value
of the condition on the IDP resource.
This bug would manifest in CI as random failures in which the expected
condition message and the actual condition message would refer to
different versions numbers of the bind secret. The actual condition
message would refer to an older version of the bind secret because the
update failed and then the new desired message got dropped on the
ground.
This commit changes the in-memory caching strategy to also cache the
computed condition messages, allowing the conditions to be updated
on the IDP resource during future calls to Sync() in the case of a
failed update.
- Make everything private
- Drop unused AuthTime field
- Use %q format string instead of "%s"
- Only rely on GetRawAttributeValues in AttributeUnchangedSinceLogin
Signed-off-by: Monis Khan <mok@vmware.com>
Highlights from this dep bump:
1. Made a copy of the v0.4.0 github.com/go-logr/stdr implementation
for use in tests. We must bump this dep as Kube code uses a
newer version now. We would have to rewrite hundreds of test log
assertions without this copy.
2. Use github.com/felixge/httpsnoop to undo the changes made by
ory/fosite#636 for CLI based login flows. This is required for
backwards compatibility with older versions of our CLI. A
separate change after this will update the CLI to be more
flexible (it is purposefully not part of this change to confirm
that we did not break anything). For all browser login flows, we
now redirect using http.StatusSeeOther instead of http.StatusFound.
3. Drop plog.RemoveKlogGlobalFlags as klog no longer mutates global
process flags
4. Only bump github.com/ory/x to v0.0.297 instead of the latest
v0.0.321 because v0.0.298+ pulls in a newer version of
go.opentelemetry.io/otel/semconv which breaks k8s.io/apiserver.
We should update k8s.io/apiserver to use the newer code.
5. Migrate all code from k8s.io/apimachinery/pkg/util/clock to
k8s.io/utils/clock and k8s.io/utils/clock/testing
6. Delete testutil.NewDeleteOptionsRecorder and migrate to the new
kubetesting.NewDeleteActionWithOptions
7. Updated ExpectedAuthorizeCodeSessionJSONFromFuzzing caused by
fosite's new rotated_secrets OAuth client field. This new field
is currently not relevant to us as we have no private clients.
Signed-off-by: Monis Khan <mok@vmware.com>
Also refactor the code that decides which types of revocation failures
are worth retrying. Be more selective by only retrying those types of
errors that are likely to be worth retrying.
- Rename the RevokeRefreshToken() function to RevokeToken() and make it
take the token type (refresh or access) as a new parameter.
- This is a prefactor getting ready to support revocation of upstream
access tokens in the garbage collection handler.
This change updates the TLS config used by all pinniped components.
There are no configuration knobs associated with this change. Thus
this change tightens our static defaults.
There are four TLS config levels:
1. Secure (TLS 1.3 only)
2. Default (TLS 1.2+ best ciphers that are well supported)
3. Default LDAP (TLS 1.2+ with less good ciphers)
4. Legacy (currently unused, TLS 1.2+ with all non-broken ciphers)
Highlights per component:
1. pinniped CLI
- uses "secure" config against KAS
- uses "default" for all other connections
2. concierge
- uses "secure" config as an aggregated API server
- uses "default" config as a impersonation proxy API server
- uses "secure" config against KAS
- uses "default" config for JWT authenticater (mostly, see code)
- no changes to webhook authenticater (see code)
3. supervisor
- uses "default" config as a server
- uses "secure" config against KAS
- uses "default" config against OIDC IDPs
- uses "default LDAP" config against LDAP IDPs
Signed-off-by: Monis Khan <mok@vmware.com>
- Used to determine on which port the impersonation proxy will bind
- Defaults to 8444, which is the old hard-coded port value
- Allow the port number to be configured to any value within the
range 1024 to 65535
- This commit does not include adding new config knobs to the ytt
values file, so while it is possible to change this port without
needing to recompile, it is not convenient
- Discover the revocation endpoint of the upstream provider in
oidc_upstream_watcher.go and save it into the cache for future use
by the garbage collector controller
- Adds RevokeRefreshToken to UpstreamOIDCIdentityProviderI
- Implements the production version of RevokeRefreshToken
- Implements test doubles for RevokeRefreshToken for future use in
garbage collector's unit tests
- Prefactors the crud and session storage types for future use in the
garbage collector controller
- See remaining TODOs in garbage_collector.go
- Requiring refresh tokens to be returned from upstream OIDC idps
- Storing refresh tokens (for oidc) and idp information (for all idps) in custom session data during authentication
- Don't pass access=offline all the time
This change fixes a copy paste error that led to the impersonation
proxy signer CA being rotated based on the configuration of the
rotation of the aggregated API serving certificate. This would lead
to occasional "Unauthorized" flakes in our CI environments that
rotate the serving certificate at a frequent interval.
Updated the certs_expirer controller logs to be more detailed.
Updated CA common names to be more specific (this does not update
any previously generated CAs).
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the kube cert agent to a middle ground behavior
that balances leader election gating with how quickly we load the
signer.
If the agent labels have not changed, we will attempt to load the
signer even if we cannot roll out the latest version of the kube
cert agent deployment.
This gives us the best behavior - we do not have controllers
fighting over the state of the deployment and we still get the
signer loaded quickly.
We will have a minute of downtime when the kube cert agent deployment
changes because the new pods will have to wait to become a leader
and for the new deployment to rollout the new pods. We would need
to have a per pod deployment if we want to avoid that downtime (but
this would come at the cost of startup time and would require
coordination with the kubelet in regards to pod readiness).
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates our certificate code to use the same 5 minute
backdate that is used by the Kubernetes controller manager. This
helps to account for clock skews between the API servers and the
kubelets that are running the pinniped pods. While this backdating
reflects a large percentage of the lifetime of our short lived
certificates (100% for the 5 minute client certificates), even a 10
minute irrevocable client certificate is within our limits. When
we move to the CSR based short lived certificates, they will always
have at least a 15 minute lifetime (5 minute backdating plus 10 minute
minimum valid duration).
Signed-off-by: Monis Khan <mok@vmware.com>
This commit makes the following changes to the kube cert agent tests:
1. Informers are synced on start using the controllerinit code
2. Deployment client and informer are synced per controller sync loop
3. Controller sync loop exits after two consistent errors
4. Use assert instead of require to avoid ending the test early
Signed-off-by: Monis Khan <mok@vmware.com>
Not required, but within the spirit of using the version number.
Since the existing kube cert agent deployment will get deleted anyway
during an upgrade, it shouldn't hurt to change the version number.
New installations will get the new version number on the new kube cert
agent deployment.
Fixes#801. The solution is complicated by the fact that the Selector
field of Deployments is immutable. It would have been easy to just
make the Selectors of the main Concierge Deployment, the Kube cert agent
Deployment, and the various Services use more specific labels, but
that would break upgrades. Instead, we make the Pod template labels and
the Service selectors more specific, because those not immutable, and
then handle the Deployment selectors in a special way.
For the main Concierge and Supervisor Deployments, we cannot change
their selectors, so they remain "app: app_name", and we make other
changes to ensure that only the intended pods are selected. We keep the
original "app" label on those pods and remove the "app" label from the
pods of the Kube cert agent Deployment. By removing it from the Kube
cert agent pods, there is no longer any chance that they will
accidentally get selected by the main Concierge Deployment.
For the Kube cert agent Deployment, we can change the immutable selector
by deleting and recreating the Deployment. The new selector uses only
the unique label that has always been applied to the pods of that
deployment. Upon recreation, these pods no longer have the "app" label,
so they will not be selected by the main Concierge Deployment's
selector.
The selector of all Services have been updated to use new labels to
more specifically target the intended pods. For the Concierge Services,
this will prevent them from accidentally including the Kube cert agent
pods. For the Supervisor Services, we follow the same convention just
to be consistent and to help future-proof the Supervisor app in case it
ever has a second Deployment added to it.
The selector of the auto-created impersonation proxy Service was
also previously using the "app" label. There is no change to this
Service because that label will now select the correct pods, since
the Kube cert agent pods no longer have that label. It would be possible
to update that selector to use the new more specific label, but then we
would need to invent a way to pass that label into the controller, so
it seemed like more work than was justified.
For clusters where the control plane nodes aren't running a CNI, the
kube-cert-agent pods deployed by concierge cannot be scheduled as they
don't know to use `hostNetwork: true`. This change allows embedding the
host network setting in the Concierge configuration. (by copying it from
the kube-controller-manager pod spec when generating the kube-cert-agent
Deployment)
Also fixed a stray double comma in one of the nearby tests.
- Change list of attributeParsingOverrides to a map
- Add unit test for sAMAccountName as group name without the override
- Change some comments in the the type definition.
In the upstream dynamiccertificates package, we rely on two pieces
of code:
1. DynamicServingCertificateController.newTLSContent which calls
- clientCA.CurrentCABundleContent
- servingCert.CurrentCertKeyContent
2. unionCAContent.VerifyOptions which calls
- unionCAContent.CurrentCABundleContent
This results in calls to our tlsServingCertDynamicCertProvider and
impersonationSigningCertProvider. If we Unset these providers, we
subtly break these consumers. At best this results in test slowness
and flakes while we wait for reconcile loops to converge. At worst,
it results in actual errors during runtime. For example, we
previously would Unset the impersonationSigningCertProvider on any
sync loop error (even a transient one caused by a network blip or
a conflict between writes from different replicas of the concierge).
This would cause us to transiently fail to issue new certificates
from the token credential require API. It would also cause us to
transiently fail to authenticate previously issued client certs
(which results in occasional Unauthorized errors in CI).
Signed-off-by: Monis Khan <mok@vmware.com>
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
At a high level, it switches us to a distroless base container image, but that also includes several related bits:
- Add a writable /tmp but make the rest of our filesystems read-only at runtime.
- Condense our main server binaries into a single pinniped-server binary. This saves a bunch of space in
the image due to duplicated library code. The correct behavior is dispatched based on `os.Args[0]`, and
the `pinniped-server` binary is symlinked to `pinniped-concierge` and `pinniped-supervisor`.
- Strip debug symbols from our binaries. These aren't really useful in a distroless image anyway and all the
normal stuff you'd expect to work, such as stack traces, still does.
- Add a separate `pinniped-concierge-kube-cert-agent` binary with "sleep" and "print" functionality instead of
using builtin /bin/sleep and /bin/cat for the kube-cert-agent. This is split from the main server binary
because the loading/init time of the main server binary was too large for the tiny resource footprint we
established in our kube-cert-agent PodSpec. Using a separate binary eliminates this issue and the extra
binary adds only around 1.5MiB of image size.
- Switch the kube-cert-agent code to use a JSON `{"tls.crt": "<b64 cert>", "tls.key": "<b64 key>"}` format.
This is more robust to unexpected input formatting than the old code, which simply concatenated the files
with some extra newlines and split on whitespace.
- Update integration tests that made now-invalid assumptions about the `pinniped-server` image.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Prior to this fix, this controller did not correctly react to changes to the ClusterIP service. It would still eventually react with a long delay due to our 5 minute resync interval.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change fixes a race that can occur because we have multiple
writers with no leader election lock.
1. TestAPIServingCertificateAutoCreationAndRotation/automatic
expires the current serving certificate
2. CertsExpirerController 1 deletes expired serving certificate
3. CertsExpirerController 2 starts deletion of expired serving
certificate but has not done so yet
4. CertsManagerController 1 creates new serving certificate
5. TestAPIServingCertificateAutoCreationAndRotation/automatic
records the new serving certificate
6. CertsExpirerController 2 finishes deletion, and thus deletes the
newly created serving certificate instead of the old one
7. CertsManagerController 2 creates new serving certificate
8. TestAPIServingCertificateAutoCreationAndRotation/automatic keeps
running and eventually times out because it is expecting the
serving certificate created by CertsManagerController 2 to match
the value it recorded from CertsManagerController 1 (which will
never happen since that certificate was incorrectly deleted).
Signed-off-by: Monis Khan <mok@vmware.com>
TestAgentController really runs the controller and evaluates multiple
calls to the controller's Sync with real informers caching updates.
There is a large amount of non-determinism in this unit test, and it
does not always behave the same way. Because it makes assertions about
the specific errors that should be returned by Sync, it was not
accounting for some errors that are only returned by Sync once in a
while depending on the exact (unpredictable) order of operations.
This commit doesn't fix the non-determinism in the test, but rather
tries to work around it by also allowing other (undesired but
inevitable) error messages to appear in the list of actual error
messages returned by the calls to the Sync function.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
After noticing that the upstream OIDC discovery calls can hang
indefinitely, I had tried to impose a one minute timeout on them
by giving them a timeout context. However, I hadn't noticed that the
context also gets passed into the JWKS fetching object, which gets
added to our cache and used later. Therefore the timeout context
was added to the cache and timed out while sitting in the cache,
causing later JWKS fetchers to fail.
This commit is trying again to impose a reasonable timeout on these
discovery and JWKS calls, but this time by using http.Client's Timeout
field, which is documented to be a timeout for *each* request/response
cycle, so hopefully this is a more appropriate way to impose a timeout
for this use case. The http.Client instance ends up in the cache on
the JWKS fetcher object, so the timeout should apply to each JWKS
request as well.
Requests that can hang forever are effectively a server-side resource
leak, which could theoretically be taken advantage of in a denial of
service attempt, so it would be nice to avoid having them.
- Add new optional ytt params for the Supervisor deployment.
- When the Supervisor is making calls to an upstream OIDC provider,
use these variables if they were provided.
- These settings are integration tested in the main CI pipeline by
sometimes setting them on deployments in certain cases, and then
letting the existing integration tests (e.g. TestE2EFullIntegration)
provide the coverage, so there are no explicit changes to the
integration tests themselves in this commit.
- this allows the oidc upsream watcher to honor the
HTTP_PROXY,HTTPS_PROXY,NO_PROXY environment variables
Co-authored-by: Christian Ang <angc@vmware.com>
