This may be a temporary fix. It switches the manual auth code prompt to use `promptForValue()` instead of `promptForSecret()`. The `promptForSecret()` function no longer supports cancellation (the v0.9.2 behavior) and the method of cancelling in `promptForValue()` is now based on running the blocking read in a background goroutine, which is allowed to block forever or leak (which is not important for our CLI use case).
This means that the authorization code is now visible in the user's terminal, but this is really not a big deal because of PKCE and the limited lifetime of an auth code.
The main goroutine now correctly waits for the "manual prompt" goroutine to clean up, which now includes printing the extra newline that would normally have been entered by the user in the manual flow.
The text of the manual login prompt is updated to be more concise and less scary (don't use the word "fail").
Signed-off-by: Matt Moyer <moyerm@vmware.com>
It turns out that `syscall.Stdin` is of type `int` on Linux and macOS, but not on Windows (it's `syscall.Handle`). This should now be portable and do all the require type casting on every platform.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
For CLI-based auth, such as with LDAP upstream identity providers, the
user may use these environment variables to avoid getting interactively
prompted for username and password.
I found that there are some situations with `response_mode=form_post` where Chrome will open additional speculative TCP connections. These connections will be idle so they block server shutdown until the (previously 5s) timeout. Lowering this to 500ms should be safe and makes any added latency at login much less noticeable.
More information about Chrome's TCP-level behavior here: https://bugs.chromium.org/p/chromium/issues/detail?id=116982#c5
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This flag is (for now) meant only to facilitate end-to-end testing, allowing us to force the "manual" login flow. If it ends up being useful we can un-hide it, but this seemed like the safest option to start with.
There is also a corresponding `--oidc-skip-listen` on the `pinniped get kubeconfig` command.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This adds a new login flow that allows manually pasting the authorization code instead of receiving a browser-based callback.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is a more restrictive library interface that more closely matches the use cases of our new form_post login flow.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This allows the prompts to be cancelled, which we need to be able to do in the case where we prompt for a manually-pasted auth code but the automatic callback succeeds.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
See RFC6648 which asks that people stop using `X-` on header names.
Also Matt preferred not mentioning "IDP" in the header name.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Also some light prefactoring in login.go to make room for LDAP-style
login, which is not implemented yet in this commit. TODOs are added.
- And fix a test pollution problem in login_oidc_test.go where it was
using a real on-disk CLI cache file, so the tests were polluted by
the contents of that file and would sometimes cause each other to
fail.
We have some nice normalization code in this package to remove expired or otherwise malformed cache entries, but we weren't calling it in the appropriate place.
Added calls to normalize the cache data structure before and after each transaction, and added test cases to ensure that it's being called.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were previously issuing both client certs and server certs with
both extended key usages included. Split the Issue*() methods into
separate methods for issuing server certs versus client certs so
they can have different extended key usages tailored for each use
case.
Also took the opportunity to clean up the parameters of the Issue*()
methods and New() methods to more closely match how we prefer to call
them. We were always only passing the common name part of the
pkix.Name to New(), so now the New() method just takes the common name
as a string. When making a server cert, we don't need to set the
deprecated common name field, so remove that param. When making a client
cert, we're always making it in the format expected by the Kube API
server, so just accept the username and group as parameters directly.
All controller unit tests were accidentally using a timeout context
for the informers, instead of a cancel context which stays alive until
each test is completely finished. There is no reason to risk
unpredictable behavior of a timeout being reached during an individual
test, even though with the previous 3 second timeout it could only be
reached on a machine which is running orders of magnitude slower than
usual, since each test usually runs in about 100-300 ms. Unfortunately,
sometimes our CI workers might get that slow.
This sparked a review of other usages of timeout contexts in other
tests, and all of them were increased to a minimum value of 1 minute,
under the rule of thumb that our tests will be more reliable on slow
machines if they "pass fast and fail slow".
This change adds a new virtual aggregated API that can be used by
any user to echo back who they are currently authenticated as. This
has general utility to end users and can be used in tests to
validate if authentication was successful.
Signed-off-by: Monis Khan <mok@vmware.com>
This is a partial revert of 288d9c999e. For some reason it didn't occur to me
that we could do it this way earlier. Whoops.
This also contains a middleware update: mutation funcs can return an error now
and short-circuit the rest of the request/response flow. The idea here is that
if someone is configuring their kubeclient to use middleware, they are agreeing
to a narrow-er client contract by doing so (e.g., their TokenCredentialRequest's
must have an Spec.Authenticator.APIGroup set).
I also updated some internal/groupsuffix tests to be more realistic.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
When the Pinniped server has been installed with the `api_group_suffix`
option, for example using `mysuffix.com`, then clients who would like to
submit a `TokenCredentialRequest` to the server should set the
`Spec.Authenticator.APIGroup` field as `authentication.concierge.mysuffix.com`.
This makes more sense from the client's point of view than using the
default `authentication.concierge.pinniped.dev` because
`authentication.concierge.mysuffix.com` is the name of the API group
that they can observe their cluster and `authentication.concierge.pinniped.dev`
does not exist as an API group on their cluster.
This commit includes both the client and server-side changes to make
this work, as well as integration test updates.
Co-authored-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
Co-authored-by: Margo Crawford <margaretc@vmware.com>
Yes, this is a huge commit.
The middleware allows you to customize the API groups of all of the
*.pinniped.dev API groups.
Some notes about other small things in this commit:
- We removed the internal/client package in favor of pkg/conciergeclient. The
two packages do basically the same thing. I don't think we use the former
anymore.
- We re-enabled cluster-scoped owner assertions in the integration tests.
This code was added in internal/ownerref. See a0546942 for when this
assertion was removed.
- Note: the middlware code is in charge of restoring the GV of a request object,
so we should never need to write mutations that do that.
- We updated the supervisor secret generation to no longer manually set an owner
reference to the deployment since the middleware code now does this. I think we
still need some way to make an initial event for the secret generator
controller, which involves knowing the namespace and the name of the generated
secret, so I still wired the deployment through. We could use a namespace/name
tuple here, but I was lazy.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
This change updates our clients to always set an owner ref when:
1. The operation is a create
2. The object does not already have an owner ref set
Signed-off-by: Monis Khan <mok@vmware.com>
This is a bit more clear. We're changing this now because it is a non-backwards-compatible change that we can make now since none of this RFC8693 token exchange stuff has been released yet.
There is also a small typo fix in some flag usages (s/RF8693/RFC8693/)
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- The overall timeout for logins is increased to 90 minutes.
- The timeout for token refresh is increased from 30 seconds to 60 seconds to be a bit more tolerant of extremely slow networks.
- A new, matching timeout of 60 seconds has been added for the OIDC discovery, auth code exchange, and RFC8693 token exchange operations.
The new code uses the `http.Client.Timeout` field rather than managing contexts on individual requests. This is easier because the OIDC package stores a context at creation time and tries to use it later when performing key refresh operations.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is a slighly evolved version of our previous client package, exported to be public and refactored to use functional options for API maintainability.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Before this, we weren't properly parsing the `Content-Type` header. This breaks in integration with the Supervisor since it sends an extra encoding parameter like `application/json;charset=UTF-8`.
This change switches to properly parsing with the `mime.ParseMediaType` function, and adds test cases to match the supervisor behavior.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I think this should be more correct. In the server we're authenticating the request primarily via the `subject_token` parameter anyway, and Fosite needs the `client_id` to be set.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This refactors the `UpstreamOIDCIdentityProviderI` interface and its implementations to pass ID token claims through a `*oidctypes.Token` return parameter rather than as a third return parameter.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is just a more convenient copy of these values which are already stored inside the ID token. This will save us from having to pass them around seprately or re-parse them later.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
