All controller unit tests were accidentally using a timeout context
for the informers, instead of a cancel context which stays alive until
each test is completely finished. There is no reason to risk
unpredictable behavior of a timeout being reached during an individual
test, even though with the previous 3 second timeout it could only be
reached on a machine which is running orders of magnitude slower than
usual, since each test usually runs in about 100-300 ms. Unfortunately,
sometimes our CI workers might get that slow.
This sparked a review of other usages of timeout contexts in other
tests, and all of them were increased to a minimum value of 1 minute,
under the rule of thumb that our tests will be more reliable on slow
machines if they "pass fast and fail slow".
We don't support using the impersonate headers through the impersonation
proxy yet, so this integration test is a negative test which asserts
that we get an error.
Also:
- Shut down the informer correctly in
concierge_impersonation_proxy_test.go
- Remove the t.Failed() checks which avoid cleaning up after failed
tests. This was inconsistent with how most of the tests work, and
left cruft on clusters when a test failed.
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also:
- Changed base64 encoding of impersonator bearer tokens to use
`base64.StdEncoding` to make it easier for users to manually
create a token using the unix `base64` command
- Test the headers which are and are not passed through to the Kube API
by the impersonator more carefully in the unit tests
- More WIP on concierge_impersonation_proxy_test.go
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This change adds a new virtual aggregated API that can be used by
any user to echo back who they are currently authenticated as. This
has general utility to end users and can be used in tests to
validate if authentication was successful.
Signed-off-by: Monis Khan <mok@vmware.com>
This is a partial revert of 288d9c999e. For some reason it didn't occur to me
that we could do it this way earlier. Whoops.
This also contains a middleware update: mutation funcs can return an error now
and short-circuit the rest of the request/response flow. The idea here is that
if someone is configuring their kubeclient to use middleware, they are agreeing
to a narrow-er client contract by doing so (e.g., their TokenCredentialRequest's
must have an Spec.Authenticator.APIGroup set).
I also updated some internal/groupsuffix tests to be more realistic.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
When the Pinniped server has been installed with the `api_group_suffix`
option, for example using `mysuffix.com`, then clients who would like to
submit a `TokenCredentialRequest` to the server should set the
`Spec.Authenticator.APIGroup` field as `authentication.concierge.mysuffix.com`.
This makes more sense from the client's point of view than using the
default `authentication.concierge.pinniped.dev` because
`authentication.concierge.mysuffix.com` is the name of the API group
that they can observe their cluster and `authentication.concierge.pinniped.dev`
does not exist as an API group on their cluster.
This commit includes both the client and server-side changes to make
this work, as well as integration test updates.
Co-authored-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
Co-authored-by: Margo Crawford <margaretc@vmware.com>
Yes, this is a huge commit.
The middleware allows you to customize the API groups of all of the
*.pinniped.dev API groups.
Some notes about other small things in this commit:
- We removed the internal/client package in favor of pkg/conciergeclient. The
two packages do basically the same thing. I don't think we use the former
anymore.
- We re-enabled cluster-scoped owner assertions in the integration tests.
This code was added in internal/ownerref. See a0546942 for when this
assertion was removed.
- Note: the middlware code is in charge of restoring the GV of a request object,
so we should never need to write mutations that do that.
- We updated the supervisor secret generation to no longer manually set an owner
reference to the deployment since the middleware code now does this. I think we
still need some way to make an initial event for the secret generator
controller, which involves knowing the namespace and the name of the generated
secret, so I still wired the deployment through. We could use a namespace/name
tuple here, but I was lazy.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
This is extracted from library.NewClientsetForKubeConfig(). It is useful so you can assert properties of the loaded, parsed kubeconfig.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I saw this message in our CI logs, which led me to this fix.
could not update status: OIDCProvider.config.supervisor.pinniped.dev "acceptance-provider" is invalid: status.status: Unsupported value: "SameIssuerHostMustUseSameSecret": supported values: "Success", "Duplicate", "Invalid"
Also - correct an integration test error message that was misleading.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This adds a few new "create test object" helpers and extends `CreateTestOIDCProvider()` to optionally wait for the created OIDCProvider to enter some expected status condition.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I brought this over because I copied code from work in flight on
another branch. But now the other branch doesn't use this package.
No use bringing on another dependency if we can avoid it.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Variables specific to concierge add it to their name
- All variables now start with `PINNIPED_TEST_` which makes it clear
that they are for tests and also helps them not conflict with the
env vars that are used in the Pinniped CLI code
I saw this helper function the other day and wondered if we could use it.
It does indeed look like it does what we want, because when I run this code,
I get `...User "system:anonymous" cannot get resource...`.
c := library.NewAnonymousPinnipedClientset(t)
_, err := c.
ConfigV1alpha1().
CredentialIssuerConfigs("integration").
Get(context.Background(), "pinniped-config", metav1.GetOptions{})
t.Log(err)
I also ran a similar test using this new helper in the context of
library.NewClientsetWithCertAndKey(). Seemed to get us what we want.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This change replaces our previous test helpers for checking cluster capabilities and passing external test parameters. Prior to this change, we always used `$PINNIPED_*` environment variables and these variables were accessed throughout the test code.
The new code introduces a more strongly-typed `TestEnv` structure and helpers which load and expose the parameters. Tests can now call `env := library.IntegrationEnv(t)`, then access parameters such as `env.Namespace` or `env.TestUser.Token`. This should make this data dependency easier to manage and refactor in the future. In many ways this is just an extended version of the previous cluster capabilities YAML.
Tests can also check for cluster capabilities easily by using `env := library.IntegrationEnv(t).WithCapability(xyz)`.
The actual parameters are still loaded from OS environment variables by default (for compatibility), but the code now also tries to load the data from a Kubernetes Secret (`integration/pinniped-test-env` by default). I'm hoping this will be a more convenient way to pass data between various scripts than the local `/tmp` directory. I hope to remove the OS environment code in a future commit.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
