Also refactor oidc downstreamsessiondata code to be shared between
callback handler and auth handler.
Signed-off-by: Ryan Richard <richardry@vmware.com>
When the LDAP and AD IDP watcher controllers encountered an update error
while trying to update the status conditions of the IDP resources, then
they would drop the computed desired new value of the condition on the
ground. Next time the controller ran it would not try to update the
condition again because it wants to use the cached settings and had
already forgotten the desired new value of the condition computed during
the previous run of the controller. This would leave the outdated value
of the condition on the IDP resource.
This bug would manifest in CI as random failures in which the expected
condition message and the actual condition message would refer to
different versions numbers of the bind secret. The actual condition
message would refer to an older version of the bind secret because the
update failed and then the new desired message got dropped on the
ground.
This commit changes the in-memory caching strategy to also cache the
computed condition messages, allowing the conditions to be updated
on the IDP resource during future calls to Sync() in the case of a
failed update.
- Make everything private
- Drop unused AuthTime field
- Use %q format string instead of "%s"
- Only rely on GetRawAttributeValues in AttributeUnchangedSinceLogin
Signed-off-by: Monis Khan <mok@vmware.com>
For password based login on the CLI (i.e. no browser), this change
relaxes the response code check to allow for any redirect code
handled by the Go standard library. In the future, we can drop the
rewriteStatusSeeOtherToStatusFoundForBrowserless logic from the
server side code.
Signed-off-by: Monis Khan <mok@vmware.com>
Highlights from this dep bump:
1. Made a copy of the v0.4.0 github.com/go-logr/stdr implementation
for use in tests. We must bump this dep as Kube code uses a
newer version now. We would have to rewrite hundreds of test log
assertions without this copy.
2. Use github.com/felixge/httpsnoop to undo the changes made by
ory/fosite#636 for CLI based login flows. This is required for
backwards compatibility with older versions of our CLI. A
separate change after this will update the CLI to be more
flexible (it is purposefully not part of this change to confirm
that we did not break anything). For all browser login flows, we
now redirect using http.StatusSeeOther instead of http.StatusFound.
3. Drop plog.RemoveKlogGlobalFlags as klog no longer mutates global
process flags
4. Only bump github.com/ory/x to v0.0.297 instead of the latest
v0.0.321 because v0.0.298+ pulls in a newer version of
go.opentelemetry.io/otel/semconv which breaks k8s.io/apiserver.
We should update k8s.io/apiserver to use the newer code.
5. Migrate all code from k8s.io/apimachinery/pkg/util/clock to
k8s.io/utils/clock and k8s.io/utils/clock/testing
6. Delete testutil.NewDeleteOptionsRecorder and migrate to the new
kubetesting.NewDeleteActionWithOptions
7. Updated ExpectedAuthorizeCodeSessionJSONFromFuzzing caused by
fosite's new rotated_secrets OAuth client field. This new field
is currently not relevant to us as we have no private clients.
Signed-off-by: Monis Khan <mok@vmware.com>
Also refactor the code that decides which types of revocation failures
are worth retrying. Be more selective by only retrying those types of
errors that are likely to be worth retrying.
- Rename the RevokeRefreshToken() function to RevokeToken() and make it
take the token type (refresh or access) as a new parameter.
- This is a prefactor getting ready to support revocation of upstream
access tokens in the garbage collection handler.
This change updates the TLS config used by all pinniped components.
There are no configuration knobs associated with this change. Thus
this change tightens our static defaults.
There are four TLS config levels:
1. Secure (TLS 1.3 only)
2. Default (TLS 1.2+ best ciphers that are well supported)
3. Default LDAP (TLS 1.2+ with less good ciphers)
4. Legacy (currently unused, TLS 1.2+ with all non-broken ciphers)
Highlights per component:
1. pinniped CLI
- uses "secure" config against KAS
- uses "default" for all other connections
2. concierge
- uses "secure" config as an aggregated API server
- uses "default" config as a impersonation proxy API server
- uses "secure" config against KAS
- uses "default" config for JWT authenticater (mostly, see code)
- no changes to webhook authenticater (see code)
3. supervisor
- uses "default" config as a server
- uses "secure" config against KAS
- uses "default" config against OIDC IDPs
- uses "default LDAP" config against LDAP IDPs
Signed-off-by: Monis Khan <mok@vmware.com>
- Used to determine on which port the impersonation proxy will bind
- Defaults to 8444, which is the old hard-coded port value
- Allow the port number to be configured to any value within the
range 1024 to 65535
- This commit does not include adding new config knobs to the ytt
values file, so while it is possible to change this port without
needing to recompile, it is not convenient
- Allow the port number to be configured to any value within the
range 1024 to 65535
- This commit does not include adding new config knobs to the ytt
values file, so while it is possible to change this port without
needing to recompile, it is not convenient
- pull construction of authenticators.Response into searchAndBindUser
- remove information about the identity provider in the error that gets
returned to users. Put it in debug instead, where it may show up in
logs.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- changed to use custom authenticators.Response rather than the k8s one
that doesn't include space for a DN
- Added more checking for correct idp type in token handler
- small style changes
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This stores the user DN in the session data upon login and checks that
the entry still exists upon refresh. It doesn't check anything
else about the entry yet.
- Discover the revocation endpoint of the upstream provider in
oidc_upstream_watcher.go and save it into the cache for future use
by the garbage collector controller
- Adds RevokeRefreshToken to UpstreamOIDCIdentityProviderI
- Implements the production version of RevokeRefreshToken
- Implements test doubles for RevokeRefreshToken for future use in
garbage collector's unit tests
- Prefactors the crud and session storage types for future use in the
garbage collector controller
- See remaining TODOs in garbage_collector.go
Otherwise, the CA and proxy settings will not be used for the call
to the upstream token endpoint while performing the refresh. This
mistake was exposed by the TestSupervisorLogin integration test, so
it has test coverage.
- If the upstream refresh fails, then fail the downstream refresh
- If the upstream refresh returns an ID token, then validate it (we
use its claims in the future, but not in this commit)
- If the upstream refresh returns a new refresh token, then save it
into the user's session in storage
- Pass the provider cache into the token handler so it can use the
cached providers to perform upstream refreshes
- Handle unexpected errors in the token handler where the user's session
does not contain the expected data. These should not be possible
in practice unless someone is manually editing the storage, but
handle them anyway just to be safe.
- Refactor to share the refresh code between the CLI and the token
endpoint by moving it into the UpstreamOIDCIdentityProviderI
interface, since the token endpoint needed it to be part of that
interface anyway
- Requiring refresh tokens to be returned from upstream OIDC idps
- Storing refresh tokens (for oidc) and idp information (for all idps) in custom session data during authentication
- Don't pass access=offline all the time
- throw an error when prompt=none because the spec says we can't ignore
it
- ignore the other prompt params
Signed-off-by: Ryan Richard <richardry@vmware.com>
This will allow us to store custom data inside the fosite session
storage for all downstream OIDC sessions.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This change fixes a copy paste error that led to the impersonation
proxy signer CA being rotated based on the configuration of the
rotation of the aggregated API serving certificate. This would lead
to occasional "Unauthorized" flakes in our CI environments that
rotate the serving certificate at a frequent interval.
Updated the certs_expirer controller logs to be more detailed.
Updated CA common names to be more specific (this does not update
any previously generated CAs).
Signed-off-by: Monis Khan <mok@vmware.com>
At debug level:
upstreamoidc.go:213] "claims from ID token and userinfo"
providerName="oidc"
keys=[at_hash aud email email_verified exp iat iss sub]
At all level:
upstreamoidc.go:207] "claims from ID token and userinfo"
providerName="oidc"
claims="{\"at_hash\":\"C55S-BgnHTmr2_TNf...hYmVhYWESBWxvY2Fs\"}"
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the kube cert agent to a middle ground behavior
that balances leader election gating with how quickly we load the
signer.
If the agent labels have not changed, we will attempt to load the
signer even if we cannot roll out the latest version of the kube
cert agent deployment.
This gives us the best behavior - we do not have controllers
fighting over the state of the deployment and we still get the
signer loaded quickly.
We will have a minute of downtime when the kube cert agent deployment
changes because the new pods will have to wait to become a leader
and for the new deployment to rollout the new pods. We would need
to have a per pod deployment if we want to avoid that downtime (but
this would come at the cost of startup time and would require
coordination with the kubelet in regards to pod readiness).
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates our certificate code to use the same 5 minute
backdate that is used by the Kubernetes controller manager. This
helps to account for clock skews between the API servers and the
kubelets that are running the pinniped pods. While this backdating
reflects a large percentage of the lifetime of our short lived
certificates (100% for the 5 minute client certificates), even a 10
minute irrevocable client certificate is within our limits. When
we move to the CSR based short lived certificates, they will always
have at least a 15 minute lifetime (5 minute backdating plus 10 minute
minimum valid duration).
Signed-off-by: Monis Khan <mok@vmware.com>
CertificatesV1beta1 was removed in Kube 1.22, so the tests cannot
blindly rely on it anymore. Use CertificatesV1 whenever the server
reports that is available, and otherwise use the old
CertificatesV1beta1.
Note that CertificatesV1 was introduced in Kube 1.19.
This commit makes the following changes to the kube cert agent tests:
1. Informers are synced on start using the controllerinit code
2. Deployment client and informer are synced per controller sync loop
3. Controller sync loop exits after two consistent errors
4. Use assert instead of require to avoid ending the test early
Signed-off-by: Monis Khan <mok@vmware.com>
Not required, but within the spirit of using the version number.
Since the existing kube cert agent deployment will get deleted anyway
during an upgrade, it shouldn't hurt to change the version number.
New installations will get the new version number on the new kube cert
agent deployment.
Fixes#801. The solution is complicated by the fact that the Selector
field of Deployments is immutable. It would have been easy to just
make the Selectors of the main Concierge Deployment, the Kube cert agent
Deployment, and the various Services use more specific labels, but
that would break upgrades. Instead, we make the Pod template labels and
the Service selectors more specific, because those not immutable, and
then handle the Deployment selectors in a special way.
For the main Concierge and Supervisor Deployments, we cannot change
their selectors, so they remain "app: app_name", and we make other
changes to ensure that only the intended pods are selected. We keep the
original "app" label on those pods and remove the "app" label from the
pods of the Kube cert agent Deployment. By removing it from the Kube
cert agent pods, there is no longer any chance that they will
accidentally get selected by the main Concierge Deployment.
For the Kube cert agent Deployment, we can change the immutable selector
by deleting and recreating the Deployment. The new selector uses only
the unique label that has always been applied to the pods of that
deployment. Upon recreation, these pods no longer have the "app" label,
so they will not be selected by the main Concierge Deployment's
selector.
The selector of all Services have been updated to use new labels to
more specifically target the intended pods. For the Concierge Services,
this will prevent them from accidentally including the Kube cert agent
pods. For the Supervisor Services, we follow the same convention just
to be consistent and to help future-proof the Supervisor app in case it
ever has a second Deployment added to it.
The selector of the auto-created impersonation proxy Service was
also previously using the "app" label. There is no change to this
Service because that label will now select the correct pods, since
the Kube cert agent pods no longer have that label. It would be possible
to update that selector to use the new more specific label, but then we
would need to invent a way to pass that label into the controller, so
it seemed like more work than was justified.
Changes made to both components:
1. Logs are always flushed on process exit
2. Informer cache sync can no longer hang process start up forever
Changes made to concierge:
1. Add pre-shutdown hook that waits for controllers to exit cleanly
2. Informer caches are synced in post-start hook
Changes made to supervisor:
1. Add shutdown code that waits for controllers to exit cleanly
2. Add shutdown code that waits for active connections to become idle
Waiting for controllers to exit cleanly is critical as this allows
the leader election logic to release the lock on exit. This reduces
the time needed for the next leader to be elected.
Signed-off-by: Monis Khan <mok@vmware.com>
The kubelet will send the SIGTERM signal when it wants a process to
exit. After a grace period, it will send the SIGKILL signal to
force the process to terminate. The concierge has always handled
both SIGINT and SIGTERM as indicators for it to gracefully exit
(i.e. stop watches, controllers, etc). This change updates the
supervisor to do the same (previously it only handled SIGINT). This
is required to allow the leader election lock release logic to run.
Otherwise it can take a few minutes for new pods to acquire the
lease since they believe it is already held.
Signed-off-by: Monis Khan <mok@vmware.com>
For clusters where the control plane nodes aren't running a CNI, the
kube-cert-agent pods deployed by concierge cannot be scheduled as they
don't know to use `hostNetwork: true`. This change allows embedding the
host network setting in the Concierge configuration. (by copying it from
the kube-controller-manager pod spec when generating the kube-cert-agent
Deployment)
Also fixed a stray double comma in one of the nearby tests.
OpenShift has good defaults for these duration fields that we can
use instead of coming up with them ourselves:
e14e06ba8d/pkg/config/leaderelection/leaderelection.go (L87-L109)
Copied here for easy future reference:
// We want to be able to tolerate 60s of kube-apiserver disruption without causing pod restarts.
// We want the graceful lease re-acquisition fairly quick to avoid waits on new deployments and other rollouts.
// We want a single set of guidance for nearly every lease in openshift. If you're special, we'll let you know.
// 1. clock skew tolerance is leaseDuration-renewDeadline == 30s
// 2. kube-apiserver downtime tolerance is == 78s
// lastRetry=floor(renewDeadline/retryPeriod)*retryPeriod == 104
// downtimeTolerance = lastRetry-retryPeriod == 78s
// 3. worst non-graceful lease acquisition is leaseDuration+retryPeriod == 163s
// 4. worst graceful lease acquisition is retryPeriod == 26s
if ret.LeaseDuration.Duration == 0 {
ret.LeaseDuration.Duration = 137 * time.Second
}
if ret.RenewDeadline.Duration == 0 {
// this gives 107/26=4 retries and allows for 137-107=30 seconds of clock skew
// if the kube-apiserver is unavailable for 60s starting just before t=26 (the first renew),
// then we will retry on 26s intervals until t=104 (kube-apiserver came back up at 86), and there will
// be 33 seconds of extra time before the lease is lost.
ret.RenewDeadline.Duration = 107 * time.Second
}
if ret.RetryPeriod.Duration == 0 {
ret.RetryPeriod.Duration = 26 * time.Second
}
Signed-off-by: Monis Khan <mok@vmware.com>
This change fixes a small race condition that occurred when the
current leader failed to renew its lease. Before this change, the
leader would first release the lease via the Kube API and then would
update its in-memory status to reflect that change. Now those
events occur in the reverse (i.e. correct) order.
Signed-off-by: Monis Khan <mok@vmware.com>
- Change list of attributeParsingOverrides to a map
- Add unit test for sAMAccountName as group name without the override
- Change some comments in the the type definition.
The Kube API server code that we use will cast inputs in an attempt
to see if they implement optional interfaces. This change adds a
simple wrapper struct to prevent such casts from causing us any
issues.
Signed-off-by: Monis Khan <mok@vmware.com>
In the upstream dynamiccertificates package, we rely on two pieces
of code:
1. DynamicServingCertificateController.newTLSContent which calls
- clientCA.CurrentCABundleContent
- servingCert.CurrentCertKeyContent
2. unionCAContent.VerifyOptions which calls
- unionCAContent.CurrentCABundleContent
This results in calls to our tlsServingCertDynamicCertProvider and
impersonationSigningCertProvider. If we Unset these providers, we
subtly break these consumers. At best this results in test slowness
and flakes while we wait for reconcile loops to converge. At worst,
it results in actual errors during runtime. For example, we
previously would Unset the impersonationSigningCertProvider on any
sync loop error (even a transient one caused by a network blip or
a conflict between writes from different replicas of the concierge).
This would cause us to transiently fail to issue new certificates
from the token credential require API. It would also cause us to
transiently fail to authenticate previously issued client certs
(which results in occasional Unauthorized errors in CI).
Signed-off-by: Monis Khan <mok@vmware.com>
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
At a high level, it switches us to a distroless base container image, but that also includes several related bits:
- Add a writable /tmp but make the rest of our filesystems read-only at runtime.
- Condense our main server binaries into a single pinniped-server binary. This saves a bunch of space in
the image due to duplicated library code. The correct behavior is dispatched based on `os.Args[0]`, and
the `pinniped-server` binary is symlinked to `pinniped-concierge` and `pinniped-supervisor`.
- Strip debug symbols from our binaries. These aren't really useful in a distroless image anyway and all the
normal stuff you'd expect to work, such as stack traces, still does.
- Add a separate `pinniped-concierge-kube-cert-agent` binary with "sleep" and "print" functionality instead of
using builtin /bin/sleep and /bin/cat for the kube-cert-agent. This is split from the main server binary
because the loading/init time of the main server binary was too large for the tiny resource footprint we
established in our kube-cert-agent PodSpec. Using a separate binary eliminates this issue and the extra
binary adds only around 1.5MiB of image size.
- Switch the kube-cert-agent code to use a JSON `{"tls.crt": "<b64 cert>", "tls.key": "<b64 key>"}` format.
This is more robust to unexpected input formatting than the old code, which simply concatenated the files
with some extra newlines and split on whitespace.
- Update integration tests that made now-invalid assumptions about the `pinniped-server` image.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Prior to this fix, this controller did not correctly react to changes to the ClusterIP service. It would still eventually react with a long delay due to our 5 minute resync interval.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change fixes a race that can occur because we have multiple
writers with no leader election lock.
1. TestAPIServingCertificateAutoCreationAndRotation/automatic
expires the current serving certificate
2. CertsExpirerController 1 deletes expired serving certificate
3. CertsExpirerController 2 starts deletion of expired serving
certificate but has not done so yet
4. CertsManagerController 1 creates new serving certificate
5. TestAPIServingCertificateAutoCreationAndRotation/automatic
records the new serving certificate
6. CertsExpirerController 2 finishes deletion, and thus deletes the
newly created serving certificate instead of the old one
7. CertsManagerController 2 creates new serving certificate
8. TestAPIServingCertificateAutoCreationAndRotation/automatic keeps
running and eventually times out because it is expecting the
serving certificate created by CertsManagerController 2 to match
the value it recorded from CertsManagerController 1 (which will
never happen since that certificate was incorrectly deleted).
Signed-off-by: Monis Khan <mok@vmware.com>
This functioned fine, but did not have the intended visual appearance when it came to how the text of the auth code wrapped inside the copy button in the manual flow.
The new styling behaves correctly on at least Chrome, Firefox, and Safari on macOS.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
TestAgentController really runs the controller and evaluates multiple
calls to the controller's Sync with real informers caching updates.
There is a large amount of non-determinism in this unit test, and it
does not always behave the same way. Because it makes assertions about
the specific errors that should be returned by Sync, it was not
accounting for some errors that are only returned by Sync once in a
while depending on the exact (unpredictable) order of operations.
This commit doesn't fix the non-determinism in the test, but rather
tries to work around it by also allowing other (undesired but
inevitable) error messages to appear in the list of actual error
messages returned by the calls to the Sync function.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This is a new pacakge internal/oidc/provider/formposthtml containing a number of static files embedded using the relatively recent Go "//go:embed" functionality introduced in Go 1.16 (https://blog.golang.org/go1.16).
The Javascript and CSS files are minifiied and injected to make a single self-contained HTML response. There is a special Content-Security-Policy helper to calculate hash-based script-src and style-src rules.
This new code is covered by a new integration test that exercises the JS/HTML functionality in a real browser outside of the rest of the Supervisor.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Our Supervisor callback handler now needs to load JS and CSS from the provider endpoint, and this JS needs to make a `fetch()` call across origins (to post the form to the CLI callback). This requires a custom Content-Security-Policy compared to other pages we render.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
After noticing that the upstream OIDC discovery calls can hang
indefinitely, I had tried to impose a one minute timeout on them
by giving them a timeout context. However, I hadn't noticed that the
context also gets passed into the JWKS fetching object, which gets
added to our cache and used later. Therefore the timeout context
was added to the cache and timed out while sitting in the cache,
causing later JWKS fetchers to fail.
This commit is trying again to impose a reasonable timeout on these
discovery and JWKS calls, but this time by using http.Client's Timeout
field, which is documented to be a timeout for *each* request/response
cycle, so hopefully this is a more appropriate way to impose a timeout
for this use case. The http.Client instance ends up in the cache on
the JWKS fetcher object, so the timeout should apply to each JWKS
request as well.
Requests that can hang forever are effectively a server-side resource
leak, which could theoretically be taken advantage of in a denial of
service attempt, so it would be nice to avoid having them.
- Add new optional ytt params for the Supervisor deployment.
- When the Supervisor is making calls to an upstream OIDC provider,
use these variables if they were provided.
- These settings are integration tested in the main CI pipeline by
sometimes setting them on deployments in certain cases, and then
letting the existing integration tests (e.g. TestE2EFullIntegration)
provide the coverage, so there are no explicit changes to the
integration tests themselves in this commit.
- this allows the oidc upsream watcher to honor the
HTTP_PROXY,HTTPS_PROXY,NO_PROXY environment variables
Co-authored-by: Christian Ang <angc@vmware.com>
We want the value of time.Now() to be calculated before the call to
IssueClientCertPEM to prevent the ExpirationTimestamp from being
later than the notAfter timestamp on the issued certificate.
Signed-off-by: Monis Khan <mok@vmware.com>
Before this change, we used the `fosite.DefaultOpenIDConnectClient{}` struct, which implements the `fosite.Client` and `fosite.OpenIDConnectClient` interfaces. For a future change, we also need to implement some additional optional interfaces, so we can no longer use the provided default types. Instead, we now use a custom `clientregistry.Client{}` struct, which implements all the requisite interfaces and can be extended to handle the new functionality (in a future change).
There is also a new `clientregistry.StaticRegistry{}` struct, which implements the `fosite.ClientManager` and looks up our single static client. We could potentially extend this in the future with a registry backed by Kubernetes API, for example.
This should be 100% refactor, with no user-observable change.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change updates the impersonator to always authorize every
request instead of relying on the Kuberentes API server to perform
the check on the impersonated request. This protects us from
scenarios where we fail to correctly impersonate the user due to
some bug in our proxy logic. We still rely completely on the API
server to perform admission checks on the impersonated requests.
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the impersonation proxy code to run as a
distinct service account that only has permission to impersonate
identities. Thus any future vulnerability that causes the
impersonation headers to be dropped will fail closed instead of
escalating to the concierge's default service account which has
significantly more permissions.
Signed-off-by: Monis Khan <mok@vmware.com>
WithImpersonation already deletes impersonation headers and has done
so since the early days:
https://github.com/kubernetes/kubernetes/pull/36769
ensureNoImpersonationHeaders will still reject any request that has
impersonation headers set so we will always fail closed.
Signed-off-by: Monis Khan <mok@vmware.com>
When anonymous authentication is disabled, the impersonation proxy
will no longer authenticate anonymous requests other than calls to
the token credential request API (this API is used to retrieve
credentials and thus must be accessed anonymously).
Signed-off-by: Benjamin A. Petersen <ben@benjaminapetersen.me>
Signed-off-by: Monis Khan <mok@vmware.com>
When a CredentialIssuer is switched from one service type to another (or switched to disabled mode), the `impersonatorconfig` controller will delete the previous Service, if any. Normally one Concierge pod will succeed to delete this initially and any other pods will see a NotFound error.
Before this change, the NotFound would bubble up and cause the strategy to enter a ErrorDuringSetup status until the next reconcile loop. We now handle this case without reporting an error.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
The new version has different behavior for the `nonce` claim, which is now omitted if it would be empty (see https://github.com/ory/fosite/pull/570).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
These are tricky because a real load balancer controller (e.g., on GKE) will overwrite and set NodePort, so we can't blindly set the desired state of this fields.
For now, we will just skip reconciling these. In the future, we could be more clever about merging them together with the current state.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
If the only thing that has changed about a strategy is the LastUpdated timestamp, then we should not update the object.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This is to allow the use of binary LDAP entry attributes as the UID.
For example, a user might like to configure AD’s objectGUID or maybe
objectSid attributes as the UID attribute.
This negatively impacts the readability of the UID when it did not come
from a binary value, but we're considering this an okay trade-off to
keep things simple for now. In the future, we may offer more
customizable encoding options for binary attributes.
These UIDs are currently only used in the downstream OIDC `sub` claim.
They do not effect the user's identity on the Kubernetes cluster,
which is only based on their mapped username and group memberships from
the upstream identity provider. We are not currently supporting any
special encoding for those username and group name LDAP attributes, so
their values in the LDAP entry must be ASCII or UTF-8 in order for them
to be interpreted correctly.
This updates the code to use a different mechanism for driving desired state:
- Read existing object
- If it does not exist, create desired object
- If it does exist, make a copy and set all the desired fields
- Do a deepequal to see if an update is necessary.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We also no longer need an initial event, since we don't do anything unless the CredentialIssuer exists, so we'll always be triggered at the appropriate time.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This type of field appears in more than one of our APIs, so this package will provide a single source of truth for validating and parsing inputs.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Automatically try to fall back to using StartTLS when using TLS
doesn't work. Only complain when both don't work.
- Remember (in-memory) which one worked and keeping using that one
in the future (unless the pod restarts).
- This enhances our LDAP client code to make it possible to optionally
dial an LDAP server without TLS and then use StartTLS to upgrade
the connection to TLS.
- The controller for LDAPIdentityProviders is not using this option
yet. That will come in a future commit.
Previously, our controllers would automatically create a CredentialIssuer with a singleton name. The helpers we had for this also used "raw" client access and did not take advantage of the informer cache pattern.
With this change, the CredentialIssuer is always created at install time in the ytt YAML. The controllers now only update the existing CredentialIssuer status, and they do so using the informer cache as much as possible.
This change is targeted at only the kubecertagent controller to start. The impersonatorconfig controller will be updated in a following PR along with other changes.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Reflect the upstream group membership into the Supervisor's
downstream tokens, so they can be added to the user's
identity on the workload clusters.
LDAP group search is configurable on the
LDAPIdentityProvider resource.
See RFC6648 which asks that people stop using `X-` on header names.
Also Matt preferred not mentioning "IDP" in the header name.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change makes it easier to understand misconfigurations caused
by issuers with extraneous trailing slashes.
Signed-off-by: Mo Khan <mok@vmware.com>
to avoid garbage collection breaking the refresh flow
Also changed the access token lifetime to be 2 minutes instead of 15
since we now have cert caching.
The supervisor treats all events the same hence it must use a
singleton queue.
Updated the integration test to remove the data race caused by
calling methods on testing.T outside of the main test go routine.
Signed-off-by: Monis Khan <mok@vmware.com>
Followup on the previous comment to split apart the ServiceAccount of the kube-cert-agent and the main concierge pod. This is a bit cleaner and ensures that in testing our main Concierge pod never requires any privileged permissions.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Since 0dfb3e95c5, we no longer directly create the kube-cert-agent Pod, so our "use"
permission on PodSecurityPolicies no longer has the intended effect. Since the deployments controller is now the
one creating pods for us, we need to get the permission on the PodSpec of the target pod instead, which we do somewhat
simply by using the same service account as the main Concierge pods.
We still set `automountServiceAccountToken: false`, so this should not actually give any useful permissions to the
agent pod when running.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- And perform auto-discovery when the flags are not set
- Several TODOs remain which will be addressed in the next commit
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This change updates the impersonator logic to pass through requests
that authenticated via a bearer token that asserts a UID. This
allows us to support service account tokens (as well as any other
form of token based authentication).
Signed-off-by: Monis Khan <mok@vmware.com>
