Also fix some tests that were broken by bumping golang and dependencies
in the previous commits.
Note that in addition to changes made to satisfy the linter which do not
impact the behavior of the code, this commit also adds ReadHeaderTimeout
to all usages of http.Server to satisfy the linter (and because it
seemed like a good suggestion).
- Two of the linters changed their names
- Updated code and nolint comments to make all linters pass with 1.44.2
- Added a new hack/install-linter.sh script to help developers install
the expected version of the linter for local development
Highlights from this dep bump:
1. Made a copy of the v0.4.0 github.com/go-logr/stdr implementation
for use in tests. We must bump this dep as Kube code uses a
newer version now. We would have to rewrite hundreds of test log
assertions without this copy.
2. Use github.com/felixge/httpsnoop to undo the changes made by
ory/fosite#636 for CLI based login flows. This is required for
backwards compatibility with older versions of our CLI. A
separate change after this will update the CLI to be more
flexible (it is purposefully not part of this change to confirm
that we did not break anything). For all browser login flows, we
now redirect using http.StatusSeeOther instead of http.StatusFound.
3. Drop plog.RemoveKlogGlobalFlags as klog no longer mutates global
process flags
4. Only bump github.com/ory/x to v0.0.297 instead of the latest
v0.0.321 because v0.0.298+ pulls in a newer version of
go.opentelemetry.io/otel/semconv which breaks k8s.io/apiserver.
We should update k8s.io/apiserver to use the newer code.
5. Migrate all code from k8s.io/apimachinery/pkg/util/clock to
k8s.io/utils/clock and k8s.io/utils/clock/testing
6. Delete testutil.NewDeleteOptionsRecorder and migrate to the new
kubetesting.NewDeleteActionWithOptions
7. Updated ExpectedAuthorizeCodeSessionJSONFromFuzzing caused by
fosite's new rotated_secrets OAuth client field. This new field
is currently not relevant to us as we have no private clients.
Signed-off-by: Monis Khan <mok@vmware.com>
- Used to determine on which port the impersonation proxy will bind
- Defaults to 8444, which is the old hard-coded port value
- Allow the port number to be configured to any value within the
range 1024 to 65535
- This commit does not include adding new config knobs to the ytt
values file, so while it is possible to change this port without
needing to recompile, it is not convenient
This change fixes a copy paste error that led to the impersonation
proxy signer CA being rotated based on the configuration of the
rotation of the aggregated API serving certificate. This would lead
to occasional "Unauthorized" flakes in our CI environments that
rotate the serving certificate at a frequent interval.
Updated the certs_expirer controller logs to be more detailed.
Updated CA common names to be more specific (this does not update
any previously generated CAs).
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates our certificate code to use the same 5 minute
backdate that is used by the Kubernetes controller manager. This
helps to account for clock skews between the API servers and the
kubelets that are running the pinniped pods. While this backdating
reflects a large percentage of the lifetime of our short lived
certificates (100% for the 5 minute client certificates), even a 10
minute irrevocable client certificate is within our limits. When
we move to the CSR based short lived certificates, they will always
have at least a 15 minute lifetime (5 minute backdating plus 10 minute
minimum valid duration).
Signed-off-by: Monis Khan <mok@vmware.com>
In the upstream dynamiccertificates package, we rely on two pieces
of code:
1. DynamicServingCertificateController.newTLSContent which calls
- clientCA.CurrentCABundleContent
- servingCert.CurrentCertKeyContent
2. unionCAContent.VerifyOptions which calls
- unionCAContent.CurrentCABundleContent
This results in calls to our tlsServingCertDynamicCertProvider and
impersonationSigningCertProvider. If we Unset these providers, we
subtly break these consumers. At best this results in test slowness
and flakes while we wait for reconcile loops to converge. At worst,
it results in actual errors during runtime. For example, we
previously would Unset the impersonationSigningCertProvider on any
sync loop error (even a transient one caused by a network blip or
a conflict between writes from different replicas of the concierge).
This would cause us to transiently fail to issue new certificates
from the token credential require API. It would also cause us to
transiently fail to authenticate previously issued client certs
(which results in occasional Unauthorized errors in CI).
Signed-off-by: Monis Khan <mok@vmware.com>
Prior to this fix, this controller did not correctly react to changes to the ClusterIP service. It would still eventually react with a long delay due to our 5 minute resync interval.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This updates the code to use a different mechanism for driving desired state:
- Read existing object
- If it does not exist, create desired object
- If it does exist, make a copy and set all the desired fields
- Do a deepequal to see if an update is necessary.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We also no longer need an initial event, since we don't do anything unless the CredentialIssuer exists, so we'll always be triggered at the appropriate time.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were previously issuing both client certs and server certs with
both extended key usages included. Split the Issue*() methods into
separate methods for issuing server certs versus client certs so
they can have different extended key usages tailored for each use
case.
Also took the opportunity to clean up the parameters of the Issue*()
methods and New() methods to more closely match how we prefer to call
them. We were always only passing the common name part of the
pkix.Name to New(), so now the New() method just takes the common name
as a string. When making a server cert, we don't need to set the
deprecated common name field, so remove that param. When making a client
cert, we're always making it in the format expected by the Kube API
server, so just accept the username and group as parameters directly.
To make an impersonation request, first make a TokenCredentialRequest
to get a certificate. That cert will either be issued by the Kube
API server's CA or by a new CA specific to the impersonator. Either
way, you can then make a request to the impersonator and present
that client cert for auth and the impersonator will accept it and
make the impesonation call on your behalf.
The impersonator http handler now borrows some Kube library code
to handle request processing. This will allow us to more closely
mimic the behavior of a real API server, e.g. the client cert
auth will work exactly like the real API server.
Signed-off-by: Monis Khan <mok@vmware.com>
All controller unit tests were accidentally using a timeout context
for the informers, instead of a cancel context which stays alive until
each test is completely finished. There is no reason to risk
unpredictable behavior of a timeout being reached during an individual
test, even though with the previous 3 second timeout it could only be
reached on a machine which is running orders of magnitude slower than
usual, since each test usually runs in about 100-300 ms. Unfortunately,
sometimes our CI workers might get that slow.
This sparked a review of other usages of timeout contexts in other
tests, and all of them were increased to a minimum value of 1 minute,
under the rule of thumb that our tests will be more reliable on slow
machines if they "pass fast and fail slow".
In impersonator_config_test.go, instead of waiting for the resource
version to appear in the informers, wait for the actual object to
appear.
This is an attempt to resolve flaky failures that only happen in CI,
but it also cleans up the test a bit by avoiding inventing fake resource
version numbers all over the test.
Signed-off-by: Monis Khan <mok@vmware.com>
- Use `Eventually` when making tls connections because the production
code's handling of starting and stopping the TLS server port
has some async behavior.
- Don't use resource version "0" because that has special meaning
in the informer libraries.
This updates our issuerconfig.UpdateStrategy to sort strategies according to a weighted preference.
The TokenCredentialRequest API strategy is preffered, followed by impersonation proxy, followed by any other unknown types.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Ryan Richard