- Specify mappings on OIDCIdentityProvider.spec.claims.additionalClaimMappings
- Advertise additionalClaims in the OIDC discovery endpoint under claims_supported
Co-authored-by: Ryan Richard <richardry@vmware.com>
Co-authored-by: Joshua Casey <joshuatcasey@gmail.com>
When the token exchange grant type is used to get a cluster-scoped
ID token, the returned token has a new audience value. The client ID
of the client which performed the authorization was lost. This didn't
matter before, since the only client was `pinniped-cli`, but now that
dynamic clients can be registered, the information would be lost in the
cluster-scoped ID token. It could be useful for logging, tracing, or
auditing, so preserve the information by putting the client ID into the
`azp` claim in every ID token (authcode exchange, clsuter-scoped, and
refreshed ID tokens).
- For backwards compatibility with older Pinniped CLIs, the pinniped-cli
client does not need to request the username or groups scopes for them
to be granted. For dynamic clients, the usual OAuth2 rules apply:
the client must be allowed to request the scopes according to its
configuration, and the client must actually request the scopes in the
authorization request.
- If the username scope was not granted, then there will be no username
in the ID token, and the cluster-scoped token exchange will fail since
there would be no username in the resulting cluster-scoped ID token.
- The OIDC well-known discovery endpoint lists the username and groups
scopes in the scopes_supported list, and lists the username and groups
claims in the claims_supported list.
- Add username and groups scopes to the default list of scopes
put into kubeconfig files by "pinniped get kubeconfig" CLI command,
and the default list of scopes used by "pinniped login oidc" when
no list of scopes is specified in the kubeconfig file
- The warning header about group memberships changing during upstream
refresh will only be sent to the pinniped-cli client, since it is
only intended for kubectl and it could leak the username to the
client (which may not have the username scope granted) through the
warning message text.
- Add the user's username to the session storage as a new field, so that
during upstream refresh we can compare the original username from the
initial authorization to the refreshed username, even in the case when
the username scope was not granted (and therefore the username is not
stored in the ID token claims of the session storage)
- Bump the Supervisor session storage format version from 2 to 3
due to the username field being added to the session struct
- Extract commonly used string constants related to OIDC flows to api
package.
- Change some import names to make them consistent:
- Always import github.com/coreos/go-oidc/v3/oidc as "coreosoidc"
- Always import go.pinniped.dev/generated/latest/apis/supervisor/oidc
as "oidcapi"
- Always import go.pinniped.dev/internal/oidc as "oidc"
- Add dynamic client unit tests for the upstream OIDC callback and
POST login endpoints.
- Enhance a few log statements to print the full fosite error messages
into the logs where they were previously only printing the name of
the error type.
This is only a first commit towards making this feature work.
- Hook dynamic clients into fosite by returning them from the storage
interface (after finding and validating them)
- In the auth endpoint, prevent the use of the username and password
headers for dynamic clients to force them to use the browser-based
login flows for all the upstream types
- Add happy path integration tests in supervisor_login_test.go
- Add lots of comments (and some small refactors) in
supervisor_login_test.go to make it much easier to understand
- Add lots of unit tests for the auth endpoint regarding dynamic clients
(more unit tests to be added for other endpoints in follow-up commits)
- Enhance crud.go to make lifetime=0 mean never garbage collect,
since we want client secret storage Secrets to last forever
- Move the OIDCClient validation code to a package where it can be
shared between the controller and the fosite storage interface
- Make shared test helpers for tests that need to create OIDC client
secret storage Secrets
- Create a public const for "pinniped-cli" now that we are using that
string in several places in the production code
The other handlers for GET and POST requests are not yet implemented in
this commit. The shared handler code in login_handler.go takes care of
things checking the method, checking the CSRF cookie, decoding the state
param, and adding security headers on behalf of both the GET and POST
handlers.
Some code has been extracted from callback_handler.go to be shared.
Also refactor oidc downstreamsessiondata code to be shared between
callback handler and auth handler.
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Requiring refresh tokens to be returned from upstream OIDC idps
- Storing refresh tokens (for oidc) and idp information (for all idps) in custom session data during authentication
- Don't pass access=offline all the time
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
This is a new pacakge internal/oidc/provider/formposthtml containing a number of static files embedded using the relatively recent Go "//go:embed" functionality introduced in Go 1.16 (https://blog.golang.org/go1.16).
The Javascript and CSS files are minifiied and injected to make a single self-contained HTML response. There is a special Content-Security-Policy helper to calculate hash-based script-src and style-src rules.
This new code is covered by a new integration test that exercises the JS/HTML functionality in a real browser outside of the rest of the Supervisor.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is a bit more clear. We're changing this now because it is a non-backwards-compatible change that we can make now since none of this RFC8693 token exchange stuff has been released yet.
There is also a small typo fix in some flag usages (s/RF8693/RFC8693/)
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This refactors the `UpstreamOIDCIdentityProviderI` interface and its implementations to pass ID token claims through a `*oidctypes.Token` return parameter rather than as a third return parameter.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We missed this in the original interface specification, but the `grant_type=authorization_code` requires it, per RFC6749 (https://tools.ietf.org/html/rfc6749#section-4.1.3).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Also use ConstantTimeCompare() to compare CSRF tokens to prevent
leaking any information in how quickly we reject bad tokens.
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also aggresively refactor for readability:
- Make helper validations functions for each type of storage
- Try to label symbols based on their downstream/upstream use and group them
accordingly
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Also handle several more error cases
- Move RequireTimeInDelta to shared testutils package so other tests
can also use it
- Move all of the oidc test helpers into a new oidc/oidctestutils
package to break a circular import dependency. The shared testutil
package can't depend on any of our other packages or else we
end up with circular dependencies.
- Lots more assertions about what was stored at the end of the
request to build confidence that we are going to pass all of the
right settings over to the token endpoint through the storage, and
also to avoid accidental regressions in that area in the future
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also refactor to get rid of duplicate test structs.
Also also don't default groups ID token claim because there is no standard one.
Also also also add some logging that will hopefully help us in debugging in the
future.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
