- AudienceMatchingStrategy: we want to use the default matcher from
fosite, so remove that line
- AllowedPromptValues: We can use the default if we add a small
change to the auth_handler.go to account for it (in a future commit)
- MinParameterEntropy: Use the fosite default to make it more likely
that off the shelf OIDC clients can work with the supervisor
Signed-off-by: Ryan Richard <richardry@vmware.com>
When we try to decode with the wrong decryption key, we could get any number of
error messages, depending on what failure mode we are in (couldn't authenticate
plaintext after decryption, couldn't deserialize, etc.). This change makes the
test weaker, but at least we know we will get an error message in the case where
the decryption key is wrong.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This also sets the CSRF cookie Secret's OwnerReference to the Pod's grandparent
Deployment so that when the Deployment is cleaned up, then the Secret is as
well.
Obviously this controller implementation has a lot of issues, but it will at
least get us started.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Note that we don't cache the securecookie.SecureCookie that we use in our
implementation. This was purely because of laziness. We should think about
caching this value in the future.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Make it more likely that the end user will get the more specific error
message saying that their refresh token has expired the first time
that they try to use an expired refresh token
Signed-off-by: Ryan Richard <richardry@vmware.com>
- This struct represents the configuration of all timeouts. These
timeouts are all interrelated to declare them all in one place.
This should also make it easier to allow the user to override
our defaults if we would like to implement such a feature in the
future.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- This is to make it easier for the token exchange branch to also edit
this test without causing a lot of merge conflicts with the
refresh token branch, to enable parallel development of closely
related stories.
- This refactor will allow us to add new test tables for the
refresh and token exchange requests, which both must come after
an initial successful authcode exchange has already happened
Signed-off-by: Margo Crawford <margaretc@vmware.com>
`token_endpoint_auth_signing_alg_values_supported` is only related to
private_key_jwt and client_secret_jwt client authentication methods
at the token endpoint, which we do not support. See
https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderMetadata
for more details.
Signed-off-by: Aram Price <pricear@vmware.com>
This refactors the `UpstreamOIDCIdentityProviderI` interface and its implementations to pass ID token claims through a `*oidctypes.Token` return parameter rather than as a third return parameter.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
TokenURL is used by Fosite to validate clients authenticating with the
private_key_jwt method. We don't have any use for this right now, so just leave
this blank until we need it.
See when Ryan brought this up in
https://github.com/vmware-tanzu/pinniped/pull/239#discussion_r528022162.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
We opened https://github.com/vmware-tanzu/pinniped/issues/254 for the TODO in
dynamicOpenIDConnectECDSAStrategy.GenerateToken().
This commit also ensures that linting and unit tests are passing again.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
I'm worried that these errors are going to be really burried from the user, so
add some log statements to try to make them a tiny bit more observable.
Also follow some of our error message convetions by using lowercase error
messages.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This CSRF cookie needs to be included on the request to the callback endpoint triggered by the redirect from the OIDC upstream provider. This is not allowed by `Same-Site=Strict` but is allowed by `Same-Site=Lax` because it is a "cross-site top-level navigation" [1].
We didn't catch this earlier with our Dex-based tests because the upstream and downstream issuers were on the same parent domain `*.svc.cluster.local` so the cookie was allowed even with `Strict` mode.
[1]: https://tools.ietf.org/html/draft-ietf-httpbis-cookie-same-site-00#section-3.2
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This commit includes a failing test (amongst other compiler failures) for the
dynamic signing key fetcher that we will inject into fosite. We are checking it
in so that we can pass the WIP off.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
We are currently using EC keys to sign ID tokens, so we should reflect that in
our OIDC discovery metadata.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
We missed this in the original interface specification, but the `grant_type=authorization_code` requires it, per RFC6749 (https://tools.ietf.org/html/rfc6749#section-4.1.3).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Note that this WIP commit includes a failing unit test, which will
be addressed in the next commit
Signed-off-by: Ryan Richard <richardry@vmware.com>
Generate a new cookie for the user and move on as if they had not sent
a bad cookie. Hopefully this will make the user experience better if,
for example, the server rotated cookie signing keys and then a user
submitted a very old cookie.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Also use ConstantTimeCompare() to compare CSRF tokens to prevent
leaking any information in how quickly we reject bad tokens.
Signed-off-by: Ryan Richard <richardry@vmware.com>
This is much nicer UX for an administrator installing a UpstreamOIDCProvider
CRD. They don't have to guess as hard at what the callback endpoint path should
be for their UpstreamOIDCProvider.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Also aggresively refactor for readability:
- Make helper validations functions for each type of storage
- Try to label symbols based on their downstream/upstream use and group them
accordingly
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Also handle several more error cases
- Move RequireTimeInDelta to shared testutils package so other tests
can also use it
- Move all of the oidc test helpers into a new oidc/oidctestutils
package to break a circular import dependency. The shared testutil
package can't depend on any of our other packages or else we
end up with circular dependencies.
- Lots more assertions about what was stored at the end of the
request to build confidence that we are going to pass all of the
right settings over to the token endpoint through the storage, and
also to avoid accidental regressions in that area in the future
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also refactor to get rid of duplicate test structs.
Also also don't default groups ID token claim because there is no standard one.
Also also also add some logging that will hopefully help us in debugging in the
future.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Because we want it to implement an AuthcodeExchanger interface and
do it in a way that will be more unit test-friendly than the underlying
library that we intend to use inside its implementation.
This will allow it to be imported by Go code outside of our repository, which was something we have planned for since this code was written.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- To better support having multiple downstream providers configured,
the authorize endpoint will share a CSRF cookie between all
downstream providers' authorize endpoints. The first time a
user's browser hits the authorize endpoint of any downstream
provider, that endpoint will set the cookie. Then if the user
starts an authorize flow with that same downstream provider or with
any other downstream provider which shares the same domain name
(i.e. differentiated by issuer path), then the same cookie will be
submitted and respected.
- Just in case we are sharing the domain name with some other app,
we sign the value of any new CSRF cookie and check the signature
when we receive the cookie. This wasn't strictly necessary since
we probably won't share a domain name with other apps, but it
wasn't hard to add this cookie signing.
Signed-off-by: Ryan Richard <richardry@vmware.com>
Our unit tests are gonna touch a lot more corner cases than our
integration tests, so let's make them run as close to the real
implementation as possible.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
We want to run all of the fosite validations in the authorize
endpoint, but we don't need to store anything yet because
we are storing what we need for later in the upstream state
parameter.
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Add a new helper method to plog to make a consistent way to log
expected errors at the info level (as opposed to unexpected
system errors that would be logged using plog.Error)
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also move definition of our oauth client and the general fosite
configuration to a helper so we can use the same config to construct
the handler for both test and production code.
Signed-off-by: Ryan Richard <richardry@vmware.com>
Previously we were injecting the whole oauth handler chain into this function,
which meant we were essentially writing unit tests to test our tests. Let's push
some of this logic into the source code.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Does not validate incoming request parameters yet. Also is not
served on the http/https ports yet. Those will come in future commits.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Setting a Secret in the supervisor's namespace with a special name
will cause it to get picked up and served as the supervisor's TLS
cert for any request which does not have a matching SNI cert.
- This is especially useful for when there is no DNS record for an
issuer and the user will be accessing it via IP address. This
is not how we would expect it to be used in production, but it
might be useful for other cases.
- Includes a new integration test
- Also suppress all of the warnings about ignoring the error returned by
Close() in lines like `defer x.Close()` to make GoLand happier
- TLS certificates can be configured on the OIDCProviderConfig using
the `secretName` field.
- When listening for incoming TLS connections, choose the TLS cert
based on the SNI hostname of the incoming request.
- Because SNI hostname information on incoming requests does not include
the port number of the request, we add a validation that
OIDCProviderConfigs where the issuer hostnames (not including port
number) are the same must use the same `secretName`.
- Note that this approach does not yet support requests made to an
IP address instead of a hostname. Also note that `localhost` is
considered a hostname by SNI.
- Add port 443 as a container port to the pod spec.
- A new controller watches for TLS secrets and caches them in memory.
That same in-memory cache is used while servicing incoming connections
on the TLS port.
- Make it easy to configure both port 443 and/or port 80 for various
Service types using our ytt templates for the supervisor.
- When deploying to kind, add another nodeport and forward it to the
host on another port to expose our new HTTPS supervisor port to the
host.
- When two different Issuers have the same host (i.e. they differ
only by path) then they must have the same secretName. This is because
it wouldn't make sense for there to be two different TLS certificates
for one host. Find any that do not have the same secret name to
put an error status on them and to avoid serving OIDC endpoints for
them. The host comparison is case-insensitive.
- Issuer hostnames should be treated as case-insensitive, because
DNS hostnames are case-insensitive. So https://me.com and
https://mE.cOm are duplicate issuers. However, paths are
case-sensitive, so https://me.com/A and https://me.com/a are
different issuers. Fixed this in the issuer validations and in the
OIDC Manager's request router logic.
- The OIDCProviderConfigWatcherController synchronizes the
OIDCProviderConfig settings to dynamically mount and unmount the
OIDC discovery endpoints for each provider
- Integration test passes but unit tests need to be added still
