Because otherwise `go test` will panic/crash your test if it takes
longer than 10 minutes, which is an annoying way for an integration
test to fail since it skips all of the t.Cleanup's.
This change adds a new virtual aggregated API that can be used by
any user to echo back who they are currently authenticated as. This
has general utility to end users and can be used in tests to
validate if authentication was successful.
Signed-off-by: Monis Khan <mok@vmware.com>
Makes it easy to deploy Pinniped under a different API group for manual
testing and iterating on integration tests on your laptop.
Signed-off-by: Ryan Richard <richardry@vmware.com>
We need this in CI when we want to configure Dex with the redirect URI for both
primary and secondary deploys at one time (since we only stand up Dex once).
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Previously, when triggering a Tilt reload via a *.go file change, a reload would
take ~13 seconds and we would see this error message in the Tilt logs for each
component.
Live Update failed with unexpected error:
command terminated with exit code 2
Falling back to a full image build + deploy
Now, Tilt should reload images a lot faster (~3 seconds) since we are running
the images as root.
Note! Reloading the Concierge component still takes ~13 seconds because there
are 2 containers running in the Concierge namespace that use the Concierge
image: the main Concierge app and the kube cert agent pod. Tilt can't live
reload both of these at once, so the reload takes longer and we see this error
message.
Will not perform Live Update because:
Error retrieving container info: can only get container info for a single pod; image target image:image/concierge has 2 pods
Falling back to a full image build + deploy
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
kubectl 1.20 prints "Kubernetes control plane" instead of "Kubernetes master".
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Prior to this we re-used the CLI testing client to test the authorize flow of the supervisor, but they really need to be separate upstream clients. For example, the supervisor client should be a non-public client with a client secret and a different callback endpoint.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Before, we did this in an init container, which meant if the Dex pod restarted we would have fresh certs, but our Tilt/bash setup didn't account for this.
Now, the certs are generated by a Job which runs once and saves the generated files into a Secret. This should be a bit more stable.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change deploys a small Squid-based proxy into the `dex` namespace in our integration test environment. This lets us use the cluster-local DNS name (`http://dex.dex.svc.cluster.local/dex`) as the OIDC issuer. It will make generating certificates easier, and most importantly it will mean that our CLI can see Dex at the same name/URL as the supervisor running inside the cluster.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This check predates the API renaming we did. Now that our API groups have `concierge`/`supervisor` in the name, we don't need to maintain a specific set of `cp` commands and keep them in sync, so we don't really need this check.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
These only really make sense for aggregated API types where we need `conversion-gen` to do version conversion.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I tried to follow a principle of encapsulation here - we can still default to
peeps making connections to 80/443 on a Service object, but internally we will
use 8080/8443.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This only matters for local development, since we don't use this script directly in CI. Makes the full codegen ste take ~90s on my laptop.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is the first of a few related changes that re-organize our API after the big recent changes that introduced the supervisor component.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- TLS certificates can be configured on the OIDCProviderConfig using
the `secretName` field.
- When listening for incoming TLS connections, choose the TLS cert
based on the SNI hostname of the incoming request.
- Because SNI hostname information on incoming requests does not include
the port number of the request, we add a validation that
OIDCProviderConfigs where the issuer hostnames (not including port
number) are the same must use the same `secretName`.
- Note that this approach does not yet support requests made to an
IP address instead of a hostname. Also note that `localhost` is
considered a hostname by SNI.
- Add port 443 as a container port to the pod spec.
- A new controller watches for TLS secrets and caches them in memory.
That same in-memory cache is used while servicing incoming connections
on the TLS port.
- Make it easy to configure both port 443 and/or port 80 for various
Service types using our ytt templates for the supervisor.
- When deploying to kind, add another nodeport and forward it to the
host on another port to expose our new HTTPS supervisor port to the
host.
When using kind we forward the node's port to the host, so we only
really care about the `nodePort` value. For acceptance clusters,
we put an Ingress in front of a NodePort Service, so we only really
care about the `port` value.
- When using `local()` in the Tiltfile it will not know
to watch those files for changes, so each time we use
`local()` we now also use `watch_file()`
- As a result, editing a ytt template file now causes
an immediate `kubectl apply` of the results
- Tiltfile and prepare-for-integration-tests.sh both specify the
NodePort Service using `--data-value-yaml 'service_nodeport_port=31234'`
- Also rename the namespaces used by the Concierge and Supervisor apps
during integration tests running locally
- Also continue renaming things related to the concierge app
- Enhance the uninstall test to also test uninstalling the supervisor
and local-user-authenticator apps
- Variables specific to concierge add it to their name
- All variables now start with `PINNIPED_TEST_` which makes it clear
that they are for tests and also helps them not conflict with the
env vars that are used in the Pinniped CLI code
- Intended to be a red test in this commit; will make it go
green in a future commit
- Enhance env.go and prepare-for-integration-tests.sh to make it
possible to write integration tests for the supervisor app
by setting more env vars and by exposing the service to the kind
host on a localhost port
- Add `--clean` option to prepare-for-integration-tests.sh
to make it easier to start fresh
- Make prepare-for-integration-tests.sh advise you to run
`go test -v -count 1 ./test/integration` because this does
not buffer the test output
- Make concierge_api_discovery_test.go pass by adding expectations
for the new OIDCProviderConfig type
- Prevent the server binary from lying about its version number
by having it report "?.?.?" as its version number for now.
- Later we can devise a way for CI to inject the version number
for the server into the container image at release time,
not at build time, since the version number is not known
at build time.
- Pre-release builds of the binary from before the release stage or
builds on developer workstation will also report "?.?.?" as its
version number, which is fine since they are not official releases
and shouldn't find their way to the public.
New resource naming conventions:
- Do not repeat the Kind in the name,
e.g. do not call it foo-cluster-role-binding, just call it foo
- Names will generally start with a prefix to identify our component,
so when a user lists all objects of that kind, they can tell to which
component it is related,
e.g. `kubectl get configmaps` would list one named "pinniped-config"
- It should be possible for an operator to make the word "pinniped"
mostly disappear if they choose, by specifying the app_name in
values.yaml, to the extent that is practical (but not from APIService
names because those are hardcoded in golang)
- Each role/clusterrole and its corresponding binding have the same name
- Pinniped resource names that must be known by the server golang code
are passed to the code at run time via ConfigMap, rather than
hardcoded in the golang code. This also allows them to be prepended
with the app_name from values.yaml while creating the ConfigMap.
- Since the CLI `get-kubeconfig` command cannot guess the name of the
CredentialIssuerConfig resource in advance anymore, it lists all
CredentialIssuerConfig in the app's namespace and returns an error
if there is not exactly one found, and then uses that one regardless
of its name
This is essentially meant to be be "v1alpha2" of the existing CredentialRequest API, but since we want to move API groups we can just start over at v1alpha1.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We want to be able to run kind integration tests against the same
versions that we generate code against. There is no public
kindest/node image for 1.17.9, so let's update to the next 1.17.x
version where there is an image: 1.17.11.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
The dry-run fails now because we are trying to install a CRD and a custom resource (of that CRD type) in the same step.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Also correct the webhook url setting in prepare-for-integration-tests.sh
- Change the bcrypt count to 10, because 16 is way too slow on old laptops
Signed-off-by: Ryan Richard <richardry@vmware.com>
I also started updating the script to deploy the test-webhook instead of
doing TMC stuff. I think the script should live in this repo so that
Pinniped contributors only need to worry about one repo for running
integration tests.
There are a bunch of TODOs in the script, but I figured this was a good
checkpoint. The script successfully runs on my machine and sets up the
test-webhook and pinniped on a local kind cluster. The integration tests
are failing because of some issue with pinniped talking to the test-webhook,
but this is step in the right direction.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This script was basically an alias for `./hack/module.sh unittest`. We even
tell people to run the unit tests via module.sh in our contributing doc.
Let's ditch it - the best line of (shell code) is the one you don't write.
An analagous change was made in CI to use module.sh in place of test-unit.sh.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Upgrade from `1.19.0-rc.0` to the newly-release `1.19.0`.
- Downgrade from `1.18.6` to `1.18.2` to match some downstream consumers.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Indicate the success or failure of the cluster signing key strategy
- Also introduce the concept of "capabilities" of an integration test
cluster to allow the integration tests to be run against clusters
that do or don't allow the borrowing of the cluster signing key
- Tests that are not expected to pass on clusters that lack the
borrowing of the signing key capability are now ignored by
calling the new library.SkipUnlessClusterHasCapability test helper
- Rename library.Getenv to library.GetEnv
- Add copyrights where they were missing
- Makes it easier to guess/remember what are the legal arguments
- Also update the output a little to make it easier to tell
when the command has succeeded
- And run tests using `-count 1` because cached test results are not
very trustworthy
We don't want people to run codegen.sh directly, because it is meant
to be driven by hack/module.sh. To discourage this behavior, we will hide
codegen.sh away in hack/lib. I don't think this is actually what the
hack/lib directory is for, though...meh.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Runs code generation on a per-module basis. If `CONTAINED` is not set
the code generation is run in a container.
Mount point in docker is randomzied to simulate Concourse.
Introduce K8S_PKG_VERSION to make room to build different versions
eventually.
find(1) seems to look at directory entries in the order in which they exist
in the directory fs entry. Let's sort these so that we get the same results
regardless of the order of the directory entries.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Wow fun times with symlinks. We *think* this script should work in CI
now...but we'll see.
Previously we were seeing a false positive where even though the generated
code was out of date, the CI step did not report failure.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Our unit test command is going to get slighly more complex in a future revision. This should let us avoid having to sync the CI pipeline definition so many times.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Add initial aggregated API server (squashed from a bunch of commits).
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Aram Price <pricear@vmware.com>
Signed-off-by: Ryan Richard <richardry@vmware.com>
