Changes made to both components:
1. Logs are always flushed on process exit
2. Informer cache sync can no longer hang process start up forever
Changes made to concierge:
1. Add pre-shutdown hook that waits for controllers to exit cleanly
2. Informer caches are synced in post-start hook
Changes made to supervisor:
1. Add shutdown code that waits for controllers to exit cleanly
2. Add shutdown code that waits for active connections to become idle
Waiting for controllers to exit cleanly is critical as this allows
the leader election logic to release the lock on exit. This reduces
the time needed for the next leader to be elected.
Signed-off-by: Monis Khan <mok@vmware.com>
The kubelet will send the SIGTERM signal when it wants a process to
exit. After a grace period, it will send the SIGKILL signal to
force the process to terminate. The concierge has always handled
both SIGINT and SIGTERM as indicators for it to gracefully exit
(i.e. stop watches, controllers, etc). This change updates the
supervisor to do the same (previously it only handled SIGINT). This
is required to allow the leader election lock release logic to run.
Otherwise it can take a few minutes for new pods to acquire the
lease since they believe it is already held.
Signed-off-by: Monis Khan <mok@vmware.com>
For clusters where the control plane nodes aren't running a CNI, the
kube-cert-agent pods deployed by concierge cannot be scheduled as they
don't know to use `hostNetwork: true`. This change allows embedding the
host network setting in the Concierge configuration. (by copying it from
the kube-controller-manager pod spec when generating the kube-cert-agent
Deployment)
Also fixed a stray double comma in one of the nearby tests.
OpenShift has good defaults for these duration fields that we can
use instead of coming up with them ourselves:
e14e06ba8d/pkg/config/leaderelection/leaderelection.go (L87-L109)
Copied here for easy future reference:
// We want to be able to tolerate 60s of kube-apiserver disruption without causing pod restarts.
// We want the graceful lease re-acquisition fairly quick to avoid waits on new deployments and other rollouts.
// We want a single set of guidance for nearly every lease in openshift. If you're special, we'll let you know.
// 1. clock skew tolerance is leaseDuration-renewDeadline == 30s
// 2. kube-apiserver downtime tolerance is == 78s
// lastRetry=floor(renewDeadline/retryPeriod)*retryPeriod == 104
// downtimeTolerance = lastRetry-retryPeriod == 78s
// 3. worst non-graceful lease acquisition is leaseDuration+retryPeriod == 163s
// 4. worst graceful lease acquisition is retryPeriod == 26s
if ret.LeaseDuration.Duration == 0 {
ret.LeaseDuration.Duration = 137 * time.Second
}
if ret.RenewDeadline.Duration == 0 {
// this gives 107/26=4 retries and allows for 137-107=30 seconds of clock skew
// if the kube-apiserver is unavailable for 60s starting just before t=26 (the first renew),
// then we will retry on 26s intervals until t=104 (kube-apiserver came back up at 86), and there will
// be 33 seconds of extra time before the lease is lost.
ret.RenewDeadline.Duration = 107 * time.Second
}
if ret.RetryPeriod.Duration == 0 {
ret.RetryPeriod.Duration = 26 * time.Second
}
Signed-off-by: Monis Khan <mok@vmware.com>
This change fixes a small race condition that occurred when the
current leader failed to renew its lease. Before this change, the
leader would first release the lease via the Kube API and then would
update its in-memory status to reflect that change. Now those
events occur in the reverse (i.e. correct) order.
Signed-off-by: Monis Khan <mok@vmware.com>
- Change list of attributeParsingOverrides to a map
- Add unit test for sAMAccountName as group name without the override
- Change some comments in the the type definition.
The Kube API server code that we use will cast inputs in an attempt
to see if they implement optional interfaces. This change adds a
simple wrapper struct to prevent such casts from causing us any
issues.
Signed-off-by: Monis Khan <mok@vmware.com>
In the upstream dynamiccertificates package, we rely on two pieces
of code:
1. DynamicServingCertificateController.newTLSContent which calls
- clientCA.CurrentCABundleContent
- servingCert.CurrentCertKeyContent
2. unionCAContent.VerifyOptions which calls
- unionCAContent.CurrentCABundleContent
This results in calls to our tlsServingCertDynamicCertProvider and
impersonationSigningCertProvider. If we Unset these providers, we
subtly break these consumers. At best this results in test slowness
and flakes while we wait for reconcile loops to converge. At worst,
it results in actual errors during runtime. For example, we
previously would Unset the impersonationSigningCertProvider on any
sync loop error (even a transient one caused by a network blip or
a conflict between writes from different replicas of the concierge).
This would cause us to transiently fail to issue new certificates
from the token credential require API. It would also cause us to
transiently fail to authenticate previously issued client certs
(which results in occasional Unauthorized errors in CI).
Signed-off-by: Monis Khan <mok@vmware.com>
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
At a high level, it switches us to a distroless base container image, but that also includes several related bits:
- Add a writable /tmp but make the rest of our filesystems read-only at runtime.
- Condense our main server binaries into a single pinniped-server binary. This saves a bunch of space in
the image due to duplicated library code. The correct behavior is dispatched based on `os.Args[0]`, and
the `pinniped-server` binary is symlinked to `pinniped-concierge` and `pinniped-supervisor`.
- Strip debug symbols from our binaries. These aren't really useful in a distroless image anyway and all the
normal stuff you'd expect to work, such as stack traces, still does.
- Add a separate `pinniped-concierge-kube-cert-agent` binary with "sleep" and "print" functionality instead of
using builtin /bin/sleep and /bin/cat for the kube-cert-agent. This is split from the main server binary
because the loading/init time of the main server binary was too large for the tiny resource footprint we
established in our kube-cert-agent PodSpec. Using a separate binary eliminates this issue and the extra
binary adds only around 1.5MiB of image size.
- Switch the kube-cert-agent code to use a JSON `{"tls.crt": "<b64 cert>", "tls.key": "<b64 key>"}` format.
This is more robust to unexpected input formatting than the old code, which simply concatenated the files
with some extra newlines and split on whitespace.
- Update integration tests that made now-invalid assumptions about the `pinniped-server` image.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Prior to this fix, this controller did not correctly react to changes to the ClusterIP service. It would still eventually react with a long delay due to our 5 minute resync interval.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change fixes a race that can occur because we have multiple
writers with no leader election lock.
1. TestAPIServingCertificateAutoCreationAndRotation/automatic
expires the current serving certificate
2. CertsExpirerController 1 deletes expired serving certificate
3. CertsExpirerController 2 starts deletion of expired serving
certificate but has not done so yet
4. CertsManagerController 1 creates new serving certificate
5. TestAPIServingCertificateAutoCreationAndRotation/automatic
records the new serving certificate
6. CertsExpirerController 2 finishes deletion, and thus deletes the
newly created serving certificate instead of the old one
7. CertsManagerController 2 creates new serving certificate
8. TestAPIServingCertificateAutoCreationAndRotation/automatic keeps
running and eventually times out because it is expecting the
serving certificate created by CertsManagerController 2 to match
the value it recorded from CertsManagerController 1 (which will
never happen since that certificate was incorrectly deleted).
Signed-off-by: Monis Khan <mok@vmware.com>
This functioned fine, but did not have the intended visual appearance when it came to how the text of the auth code wrapped inside the copy button in the manual flow.
The new styling behaves correctly on at least Chrome, Firefox, and Safari on macOS.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
