All controller unit tests were accidentally using a timeout context
for the informers, instead of a cancel context which stays alive until
each test is completely finished. There is no reason to risk
unpredictable behavior of a timeout being reached during an individual
test, even though with the previous 3 second timeout it could only be
reached on a machine which is running orders of magnitude slower than
usual, since each test usually runs in about 100-300 ms. Unfortunately,
sometimes our CI workers might get that slow.
This sparked a review of other usages of timeout contexts in other
tests, and all of them were increased to a minimum value of 1 minute,
under the rule of thumb that our tests will be more reliable on slow
machines if they "pass fast and fail slow".
This time, don't use the Squid proxy if the cluster supports real external load balancers (as in EKS/GKE/AKS).
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is more than an automatic merge. It also includes a rewrite of the CredentialIssuer API impersonation proxy fields using the new structure, and updates to the CLI to account for that new API.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I think this is another aspect of the test flakes we're trying to fix. This matters especially for the "Multiple Pinnipeds" test environment where two copies of the test suite are running concurrently.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
If the test is run immediately after the Concierge is installed, the API server can still have broken discovery data and return an error on the first call.
This commit adds a retry loop to attempt this first kubectl command for up to 60s before declaring failure.
The subsequent tests should be covered by this as well since they are not run in parallel.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We don't support using the impersonate headers through the impersonation
proxy yet, so this integration test is a negative test which asserts
that we get an error.
- The CA cert will end up in the end user's kubeconfig on their client
machine, so if it changes they would need to fetch the new one and
update their kubeconfig. Therefore, we should avoid changing it as
much as possible.
- Now the controller writes the CA to a different Secret. It writes both
the cert and the key so it can reuse them to create more TLS
certificates in the future.
- For now, it only needs to make more TLS certificates if the old
TLS cert Secret gets deleted or updated to be invalid. This allows
for manual rotation of the TLS certs by simply deleting the Secret.
In the future, we may want to implement some kind of auto rotation.
- For now, rotation of both the CA and TLS certs will also happen if
you manually delete the CA Secret. However, this would cause the end
users to immediately need to get the new CA into their kubeconfig,
so this is not as elegant as a normal rotation flow where you would
have a window of time where you have more than one CA.
Should work on cluster which have:
- load balancers not supported, has squid proxy (e.g. kind)
- load balancers supported, has squid proxy (e.g. EKS)
- load balancers supported, no squid proxy (e.g. GKE)
When testing with a load balancer, call the impersonation proxy through
the load balancer.
Also, added a new library.RequireNeverWithoutError() helper.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
Also update concierge_impersonation_proxy_test.go integration test
to use real TLS when calling the impersonator.
Signed-off-by: Ryan Richard <richardry@vmware.com>
There is a new feature in 1.20 that creates a ConfigMap by default in each namespace: https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.20.md#introducing-rootcaconfigmap
This broke this test because it assumed that all the ConfigMaps in the ephemeral test namespace were those created by the test code. The fix is to add a test label and rewrite our assertions to filter with it.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Also:
- Shut down the informer correctly in
concierge_impersonation_proxy_test.go
- Remove the t.Failed() checks which avoid cleaning up after failed
tests. This was inconsistent with how most of the tests work, and
left cruft on clusters when a test failed.
Signed-off-by: Ryan Richard <richardry@vmware.com>
Also:
- Changed base64 encoding of impersonator bearer tokens to use
`base64.StdEncoding` to make it easier for users to manually
create a token using the unix `base64` command
- Test the headers which are and are not passed through to the Kube API
by the impersonator more carefully in the unit tests
- More WIP on concierge_impersonation_proxy_test.go
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This change adds a new virtual aggregated API that can be used by
any user to echo back who they are currently authenticated as. This
has general utility to end users and can be used in tests to
validate if authentication was successful.
Signed-off-by: Monis Khan <mok@vmware.com>
I think we were assuming the name of our Concierge app, and getting lucky
because it was the name we use when testing locally (but not in CI).
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Watch a configmap to read the configuration of the impersonation
proxy and reconcile it.
- Implements "auto" mode by querying the API for control plane nodes.
- WIP: does not create a load balancer or proper TLS certificates yet.
Those will come in future commits.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
This is a partial revert of 288d9c999e. For some reason it didn't occur to me
that we could do it this way earlier. Whoops.
This also contains a middleware update: mutation funcs can return an error now
and short-circuit the rest of the request/response flow. The idea here is that
if someone is configuring their kubeclient to use middleware, they are agreeing
to a narrow-er client contract by doing so (e.g., their TokenCredentialRequest's
must have an Spec.Authenticator.APIGroup set).
I also updated some internal/groupsuffix tests to be more realistic.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
I think the reason we were seeing flakes here is because the kube cert agent
pods had not reached a steady state even though our test assertions passed, so
the test would proceed immediately and run more assertions on top of a weird
state of the kube cert agent pods.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This allows us to keep all of our resources in the pinniped category
while not having kubectl return errors for calls such as:
kubectl get pinniped -A
Signed-off-by: Monis Khan <mok@vmware.com>
Because it is a test of the conciergeclient package, and the naming
convention for integration test files is supervisor_*_test.go,
concierge_*_test.go, or cli_*_test.go to identify which component
the test is primarily covering.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Yes, this is a huge commit.
The middleware allows you to customize the API groups of all of the
*.pinniped.dev API groups.
Some notes about other small things in this commit:
- We removed the internal/client package in favor of pkg/conciergeclient. The
two packages do basically the same thing. I don't think we use the former
anymore.
- We re-enabled cluster-scoped owner assertions in the integration tests.
This code was added in internal/ownerref. See a0546942 for when this
assertion was removed.
- Note: the middlware code is in charge of restoring the GV of a request object,
so we should never need to write mutations that do that.
- We updated the supervisor secret generation to no longer manually set an owner
reference to the deployment since the middleware code now does this. I think we
still need some way to make an initial event for the secret generator
controller, which involves knowing the namespace and the name of the generated
secret, so I still wired the deployment through. We could use a namespace/name
tuple here, but I was lazy.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
The group claims read from the session cache file are loaded as `[]interface{}` (slice of empty interfaces) so when we previously did a `groups, _ := idTokenClaims[oidc.DownstreamGroupsClaim].([]string)`, then `groups` would always end up nil.
The solution I tried here was to convert the expected value to also be `[]interface{}` so that `require.Equal(t, ...)` does the right thing.
This bug only showed up in our acceptance environnment against Okta, since we don't have any other integration test coverage with IDPs that pass a groups claim.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were seeing a race in this test code since the require.NoError() and
require.Eventually() would write to the same testing.T state on separate
goroutines. Hopefully this helper function should cover the cases when we want
to require.NoError() inside a require.Eventually() without causing a race.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Co-authored-by: Margo Crawford <margaretc@vmware.com>
Co-authored-by: Monis Khan <i@monis.app>
This change updates our clients to always set an owner ref when:
1. The operation is a create
2. The object does not already have an owner ref set
Signed-off-by: Monis Khan <mok@vmware.com>
See comment. This is at least a first step to make our GKE acceptance
environment greener. Previously, this test assumed that the Pinniped-under-test
had been deployed in (roughly) the last 10 minutes, which is not an assumption
that we make anywhere else in the integration test suite.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Only sync on add/update of secrets in the same namespace which
have the "storage.pinniped.dev/garbage-collect-after" annotation, and
also during a full resync of the informer whenever secrets in the
same namespace with that annotation exist.
- Ignore deleted secrets to avoid having this controller trigger itself
unnecessarily when it deletes a secret. This controller is never
interested in deleted secrets, since its only job is to delete
existing secrets.
- No change to the self-imposed rate limit logic. That still applies
because secrets with this annotation will be created and updated
regularly while the system is running (not just during rare system
configuration steps).
This is a bit more clear. We're changing this now because it is a non-backwards-compatible change that we can make now since none of this RFC8693 token exchange stuff has been released yet.
There is also a small typo fix in some flag usages (s/RF8693/RFC8693/)
Signed-off-by: Matt Moyer <moyerm@vmware.com>
It would be great to do this for the supervisor's callback endpoint as well, but it's difficult to get at those since the request happens inside the spawned browser.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This reverts commit be4e34d0c0.
Roll back this change that was supposed to make the test more robust. If we
retry multiple token exchanges with the same auth code, of course we are going
to get failures on the second try onwards because the auth code was invalidated
on the first try.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
It now tests both the deprecated `pinniped get-kubeconfig` and the new `pinniped get kubeconfig --static-token` flows.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I hope this will make TestSupervisorLogin less flaky. There are some instances
where the front half of the OIDC login flow happens so fast that the JWKS
controller doesn't have time to properly generate an asymmetric key.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
We believe this API is more forwards compatible with future secrets management
use cases. The implementation is a cry for help, but I was trying to follow the
previously established pattern of encapsulating the secret generation
functionality to a single group of packages.
This commit makes a breaking change to the current OIDCProvider API, but that
OIDCProvider API was added after the latest release, so it is technically still
in development until we release, and therefore we can continue to thrash on it.
I also took this opportunity to make some things private that didn't need to be
public.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This forced us to add labels to the CSRF cookie secret, just as we do
for other Supervisor secrets. Yay tests.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Also add more log statements to the controller
- Also have the controller apply a rate limit to itself, to avoid
having a very chatty controller that runs way more often than is
needed.
- Also add an integration test for the controller's behavior.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- This struct represents the configuration of all timeouts. These
timeouts are all interrelated to declare them all in one place.
This should also make it easier to allow the user to override
our defaults if we would like to implement such a feature in the
future.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
`token_endpoint_auth_signing_alg_values_supported` is only related to
private_key_jwt and client_secret_jwt client authentication methods
at the token endpoint, which we do not support. See
https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderMetadata
for more details.
Signed-off-by: Aram Price <pricear@vmware.com>
We decided that we don't really need these in every case, since we'll be returning username and groups in a custom claim.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We are currently using EC keys to sign ID tokens, so we should reflect that in
our OIDC discovery metadata.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This fixes a regression introduced by 24c4bc0dd4. It could occasionally cause the tests to fail when run on a machine with an IPv6 localhost interface. As a fix I added a wrapper for the new Go 1.15 `LookupIP()` method, and created a partially-functional backport for Go 1.14. This should be easy to delete in the future.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This adds a few new "create test object" helpers and extends `CreateTestOIDCProvider()` to optionally wait for the created OIDCProvider to enter some expected status condition.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Note that this WIP commit includes a failing unit test, which will
be addressed in the next commit
Signed-off-by: Ryan Richard <richardry@vmware.com>
Mainly, avoid using some `testing` helpers that were added in 1.14, as well as a couple of other niceties we can live without.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We were assuming that env.SupervisorHTTPAddress was set, but it might not be
depending on the environment on which the integration tests are being run. For
example, in our acceptance environments, we don't currently set
env.SupervisorHTTPAddress.
I tried to follow the pattern from TestSupervisorOIDCDiscovery here.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Prior to this we re-used the CLI testing client to test the authorize flow of the supervisor, but they really need to be separate upstream clients. For example, the supervisor client should be a non-public client with a client secret and a different callback endpoint.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This will allow it to be imported by Go code outside of our repository, which was something we have planned for since this code was written.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This change deploys a small Squid-based proxy into the `dex` namespace in our integration test environment. This lets us use the cluster-local DNS name (`http://dex.dex.svc.cluster.local/dex`) as the OIDC issuer. It will make generating certificates easier, and most importantly it will mean that our CLI can see Dex at the same name/URL as the supervisor running inside the cluster.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
We want to have our APIs respond to `kubectl get pinniped`, and we shouldn't use `all` because we don't think most average users should have permission to see our API types, which means if we put our types there, they would get an error from `kubectl get all`.
I also added some tests to assert these properties on all `*.pinniped.dev` API resources.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
I tried to follow a principle of encapsulation here - we can still default to
peeps making connections to 80/443 on a Service object, but internally we will
use 8080/8443.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This is the first of a few related changes that re-organize our API after the big recent changes that introduced the supervisor component.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Setting a Secret in the supervisor's namespace with a special name
will cause it to get picked up and served as the supervisor's TLS
cert for any request which does not have a matching SNI cert.
- This is especially useful for when there is no DNS record for an
issuer and the user will be accessing it via IP address. This
is not how we would expect it to be used in production, but it
might be useful for other cases.
- Includes a new integration test
- Also suppress all of the warnings about ignoring the error returned by
Close() in lines like `defer x.Close()` to make GoLand happier
Based on our experiences today with GKE, it will be easier for our users
to configure Ingress health checks if the healthz endpoint is available
on the same public port as the OIDC endpoints.
Also add an integration test for the healthz endpoint now that it is
public.
Also add the optional `containers[].ports.containerPort` to the
supervisor Deployment because the GKE docs say that GKE will look
at that field while inferring how to invoke the health endpoint. See
https://cloud.google.com/kubernetes-engine/docs/concepts/ingress#def_inf_hc
- Not used by any of our integration test clusters yet
- Planning to use it later for the kind clusters and maybe for
the acceptance clusters too (although the acceptance clusters might
not need to use self-signed certs so maybe not)
- It didn't matter before because it would be cleaned up by a
t.Cleanup() function, but now that we might loop twice it will matter
during the second time through the loop
EC keys are smaller and take less time to generate. Our integration
tests were super flakey because generating an RSA key would take up to
10 seconds *gasp*. The main token verifier that we care about is
Kubernetes, which supports P256, so hopefully it won't be that much of
an issue that our default signing key type is EC. The OIDC spec seems
kinda squirmy when it comes to using non-RSA signing algorithms...
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Also continue renaming things related to the concierge app
- Enhance the uninstall test to also test uninstalling the supervisor
and local-user-authenticator apps
- Variables specific to concierge add it to their name
- All variables now start with `PINNIPED_TEST_` which makes it clear
that they are for tests and also helps them not conflict with the
env vars that are used in the Pinniped CLI code
- The OIDCProviderConfigWatcherController synchronizes the
OIDCProviderConfig settings to dynamically mount and unmount the
OIDC discovery endpoints for each provider
- Integration test passes but unit tests need to be added still
- Intended to be a red test in this commit; will make it go
green in a future commit
- Enhance env.go and prepare-for-integration-tests.sh to make it
possible to write integration tests for the supervisor app
by setting more env vars and by exposing the service to the kind
host on a localhost port
- Add `--clean` option to prepare-for-integration-tests.sh
to make it easier to start fresh
- Make prepare-for-integration-tests.sh advise you to run
`go test -v -count 1 ./test/integration` because this does
not buffer the test output
- Make concierge_api_discovery_test.go pass by adding expectations
for the new OIDCProviderConfig type
This will hopefully come in handy later if we ever decide to add
support for multiple OIDC providers as a part of one supervisor.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This change replaces our previous test helpers for checking cluster capabilities and passing external test parameters. Prior to this change, we always used `$PINNIPED_*` environment variables and these variables were accessed throughout the test code.
The new code introduces a more strongly-typed `TestEnv` structure and helpers which load and expose the parameters. Tests can now call `env := library.IntegrationEnv(t)`, then access parameters such as `env.Namespace` or `env.TestUser.Token`. This should make this data dependency easier to manage and refactor in the future. In many ways this is just an extended version of the previous cluster capabilities YAML.
Tests can also check for cluster capabilities easily by using `env := library.IntegrationEnv(t).WithCapability(xyz)`.
The actual parameters are still loaded from OS environment variables by default (for compatibility), but the code now also tries to load the data from a Kubernetes Secret (`integration/pinniped-test-env` by default). I'm hoping this will be a more convenient way to pass data between various scripts than the local `/tmp` directory. I hope to remove the OS environment code in a future commit.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This seems to fail on CI when the Concourse workers get slow and
kind stops working reliably. It would be interesting to see the
error message in that case to figure out if there's anything we
could do to make the test more resilient.
Simplifies the implementation, makes it more consistent with other
updaters of the cic (CredentialIssuerConfig), and also retries on
update conflicts
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Only inject things through the constructor that the controller
will need
- Use pkg private constants when possible for things that are not
actually configurable by the user
- Make the agent pod template private to the pkg
- Introduce a test helper to reduce some duplicated test code
- Remove some `it.Focus` lines that were accidentally committed, and
repair the broken tests that they were hiding
- Lots of TODOs added that need to be resolved to finish this WIP
- execer_test.go seems like it should be passing, but it fails (sigh)
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
New resource naming conventions:
- Do not repeat the Kind in the name,
e.g. do not call it foo-cluster-role-binding, just call it foo
- Names will generally start with a prefix to identify our component,
so when a user lists all objects of that kind, they can tell to which
component it is related,
e.g. `kubectl get configmaps` would list one named "pinniped-config"
- It should be possible for an operator to make the word "pinniped"
mostly disappear if they choose, by specifying the app_name in
values.yaml, to the extent that is practical (but not from APIService
names because those are hardcoded in golang)
- Each role/clusterrole and its corresponding binding have the same name
- Pinniped resource names that must be known by the server golang code
are passed to the code at run time via ConfigMap, rather than
hardcoded in the golang code. This also allows them to be prepended
with the app_name from values.yaml while creating the ConfigMap.
- Since the CLI `get-kubeconfig` command cannot guess the name of the
CredentialIssuerConfig resource in advance anymore, it lists all
CredentialIssuerConfig in the app's namespace and returns an error
if there is not exactly one found, and then uses that one regardless
of its name
I also started updating the script to deploy the test-webhook instead of
doing TMC stuff. I think the script should live in this repo so that
Pinniped contributors only need to worry about one repo for running
integration tests.
There are a bunch of TODOs in the script, but I figured this was a good
checkpoint. The script successfully runs on my machine and sets up the
test-webhook and pinniped on a local kind cluster. The integration tests
are failing because of some issue with pinniped talking to the test-webhook,
but this is step in the right direction.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
It looks like requests to our aggregated API service on GKE vacillate
between success and failure until they reach a converged successful
state. I think this has to do with our pods updating the API serving
cert at different times. If only one pod updates its serving cert to
the correct value, then it should respond with success. However, the
other pod would respond with failure. Depending on the load balancing
algorithm that GKE uses to send traffic to pods in a service, we could
end up with a success that we interpret as "all pods have rotated
their certs" when it really just means "at least one pod has rotated
its certs."
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This should simplify our build/test setup quite a bit, since it means we have only a single module (at the top level) with all hand-written code. I'll leave `module.sh` alone for now but we may be able to simplify that a bit more.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
- Controller and aggregated API server are allowed to run
- Keep retrying to borrow the cluster signing key in case the failure
to get it was caused by a transient failure
- The CredentialRequest endpoint will always return an authentication
failure as long as the cluster signing key cannot be borrowed
- Update which integration tests are skipped to reflect what should
and should not work based on the cluster's capability under this
new behavior
- Move CreateOrUpdateCredentialIssuerConfig() and related methods
to their own file
- Update the CredentialIssuerConfig's Status every time we try to
refresh the cluster signing key
- Indicate the success or failure of the cluster signing key strategy
- Also introduce the concept of "capabilities" of an integration test
cluster to allow the integration tests to be run against clusters
that do or don't allow the borrowing of the cluster signing key
- Tests that are not expected to pass on clusters that lack the
borrowing of the signing key capability are now ignored by
calling the new library.SkipUnlessClusterHasCapability test helper
- Rename library.Getenv to library.GetEnv
- Add copyrights where they were missing
These configuration knobs are much more human-understandable than the
previous percentage-based threshold flag.
We now allow users to set the lifetime of the serving cert via a ConfigMap.
Previously this was hardcoded to 1 year.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
The rotation is forced by a new controller that deletes the serving cert
secret, as other controllers will see this deletion and ensure that a new
serving cert is created.
Note that the integration tests now have an addition worst case runtime of
60 seconds. This is because of the way that the aggregated API server code
reloads certificates. We will fix this in a future story. Then, the
integration tests should hopefully get much faster.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
This switches us back to an approach where we use the Pod "exec" API to grab the keys we need, rather than forcing our code to run on the control plane node. It will help us fail gracefully (or dynamically switch to alternate implementations) when the cluster is not self-hosted.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Co-authored-by: Ryan Richard <richardry@vmware.com>
- It would sometimes fail with this error:
namespaces is forbidden: User "tanzu-user-authentication@groups.vmware.com"
cannot list resource "namespaces" in API group "" at the cluster scope
- Seems like it was because the RBAC rule added by the test needs a
moment before it starts to take effect, so change the test to retry
the API until it succeeds or fail after 3 seconds of trying.
- We want to follow the <noun>Request convention.
- The actual operation does not login a user, but it does retrieve a
credential with which they can login.
- This commit includes changes to all LoginRequest-related symbols and
constants to try to update their names to follow the new
CredentialRequest type.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
As discussed in API review, this field exists for convenience right
now. Since the username/groups are encoded in the Credential sent in
the LoginRequestStatus, the client still has access to their
user/groups information. We want to remove this for now to be
conservative and limit our API surface area (smaller surface area =
less to maintain). We can always add this back in the future.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- When we call the LoginRequest endpoint in loginrequest_test.go,
do it with an unauthenticated client, to make sure that endpoint works
with unauthenticated clients.
- For tests which want to test using certs returned by LoginRequest to
make API calls back to kube to check if those certs are working, make
sure they start with a bare client and then add only those certs.
Avoid accidentally picking up other kubeconfig configuration like
tokens, etc.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- For high availability reasons, we would like our app to scale linearly
with the size of the control plane. Using a DaemonSet allows us to run
one pod on each node-role.kubernetes.io/master node.
- The hope is that the Service that we create should load balance
between these pods appropriately.
- Add integration test for serving cert auto-generation and rotation
- Add unit test for `WithInitialEvent` of the cert manager controller
- Move UpdateAPIService() into the `apicerts` package, since that is
the only user of the function.
Instead, make the integration tests a separate module. You can't run
these tests by accident because they will not run at all when you
`go test` from the top-level directory. You will need to `cd test`
before using `go test` in order to run the integration tests.
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Why? Because the discovery URL is already there in the kubeconfig; let's
not make our lives more complicated by passing it in via an env var.
- Also allow for ytt callers to not specify data.values.discovery_url - there
are going to be a non-trivial number of installers of placeholder-name
that want to use the server URL found in the cluster-info ConfigMap.
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
- Seems like the next step is to allow override of the CA bundle; I didn't
do that here for simplicity of the commit, but seems like it is the right
thing to do in the future.
- Also includes bumping the api and client-go dependencies to the newer
version which also moved LoginDiscoveryConfig to the
crds.placeholder.suzerain-io.github.io group in the generated code
- Dynamically grant RBAC permission to the test user to allow them
to make read requests via the API
- Then use the credential returned from the LoginRequest to make a
request back to the API server which should be successful
Add initial aggregated API server (squashed from a bunch of commits).
Signed-off-by: Andrew Keesler <akeesler@vmware.com>
Signed-off-by: Aram Price <pricear@vmware.com>
Signed-off-by: Ryan Richard <richardry@vmware.com>
- Trying to use "placeholder-name" or "placeholder_name" everywhere
that should later be changed to the actual name of the product,
so we can just do a simple search and replace when we have a name.
