- Two of the linters changed their names
- Updated code and nolint comments to make all linters pass with 1.44.2
- Added a new hack/install-linter.sh script to help developers install
the expected version of the linter for local development
When the test was going to fail, a goroutine would accidentally block
on writing to an unbuffered channel, and the spawnTestGoroutine helper
would wait for that goroutine to end on cleanup, causing the test to
hang forever while it was trying to fail.
(cherry picked from commit 2b93fdf357)
Changes made to both components:
1. Logs are always flushed on process exit
2. Informer cache sync can no longer hang process start up forever
Changes made to concierge:
1. Add pre-shutdown hook that waits for controllers to exit cleanly
2. Informer caches are synced in post-start hook
Changes made to supervisor:
1. Add shutdown code that waits for controllers to exit cleanly
2. Add shutdown code that waits for active connections to become idle
Waiting for controllers to exit cleanly is critical as this allows
the leader election logic to release the lock on exit. This reduces
the time needed for the next leader to be elected.
Signed-off-by: Monis Khan <mok@vmware.com>
Instead of blindly waiting long enough for a disruptive change to
have been observed by the old leader and followers, we instead rely
on the approximation that checkOnlyLeaderCanWrite provides - i.e.
only a single actor believes they are the leader. This does not
account for clients that were in the followers list before and after
the disruptive change, but it serves as a reasonable approximation.
Signed-off-by: Monis Khan <mok@vmware.com>
Those images that are pulled from Dockerhub will cause pull failures
on some test clusters due to Dockerhub rate limiting.
Because we already have some images that we use for testing, and
because those images are already pre-loaded onto our CI clusters
to make the tests faster, use one of those images and always specify
PullIfNotPresent to avoid pulling the image again during the integration
test.
OpenShift has good defaults for these duration fields that we can
use instead of coming up with them ourselves:
e14e06ba8d/pkg/config/leaderelection/leaderelection.go (L87-L109)
Copied here for easy future reference:
// We want to be able to tolerate 60s of kube-apiserver disruption without causing pod restarts.
// We want the graceful lease re-acquisition fairly quick to avoid waits on new deployments and other rollouts.
// We want a single set of guidance for nearly every lease in openshift. If you're special, we'll let you know.
// 1. clock skew tolerance is leaseDuration-renewDeadline == 30s
// 2. kube-apiserver downtime tolerance is == 78s
// lastRetry=floor(renewDeadline/retryPeriod)*retryPeriod == 104
// downtimeTolerance = lastRetry-retryPeriod == 78s
// 3. worst non-graceful lease acquisition is leaseDuration+retryPeriod == 163s
// 4. worst graceful lease acquisition is retryPeriod == 26s
if ret.LeaseDuration.Duration == 0 {
ret.LeaseDuration.Duration = 137 * time.Second
}
if ret.RenewDeadline.Duration == 0 {
// this gives 107/26=4 retries and allows for 137-107=30 seconds of clock skew
// if the kube-apiserver is unavailable for 60s starting just before t=26 (the first renew),
// then we will retry on 26s intervals until t=104 (kube-apiserver came back up at 86), and there will
// be 33 seconds of extra time before the lease is lost.
ret.RenewDeadline.Duration = 107 * time.Second
}
if ret.RetryPeriod.Duration == 0 {
ret.RetryPeriod.Duration = 26 * time.Second
}
Signed-off-by: Monis Khan <mok@vmware.com>
This change fixes a small race condition that occurred when the
current leader failed to renew its lease. Before this change, the
leader would first release the lease via the Kube API and then would
update its in-memory status to reflect that change. Now those
events occur in the reverse (i.e. correct) order.
Signed-off-by: Monis Khan <mok@vmware.com>
Even though a client may hold the leader election lock in the Kube
lease API, that does not mean it has had a chance to update its
internal state to reflect that. Thus we retry the checks in
checkOnlyLeaderCanWrite a few times to allow the client to catch up.
Signed-off-by: Monis Khan <mok@vmware.com>
In the upstream dynamiccertificates package, we rely on two pieces
of code:
1. DynamicServingCertificateController.newTLSContent which calls
- clientCA.CurrentCABundleContent
- servingCert.CurrentCertKeyContent
2. unionCAContent.VerifyOptions which calls
- unionCAContent.CurrentCABundleContent
This results in calls to our tlsServingCertDynamicCertProvider and
impersonationSigningCertProvider. If we Unset these providers, we
subtly break these consumers. At best this results in test slowness
and flakes while we wait for reconcile loops to converge. At worst,
it results in actual errors during runtime. For example, we
previously would Unset the impersonationSigningCertProvider on any
sync loop error (even a transient one caused by a network blip or
a conflict between writes from different replicas of the concierge).
This would cause us to transiently fail to issue new certificates
from the token credential require API. It would also cause us to
transiently fail to authenticate previously issued client certs
(which results in occasional Unauthorized errors in CI).
Signed-off-by: Monis Khan <mok@vmware.com>
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
At a high level, it switches us to a distroless base container image, but that also includes several related bits:
- Add a writable /tmp but make the rest of our filesystems read-only at runtime.
- Condense our main server binaries into a single pinniped-server binary. This saves a bunch of space in
the image due to duplicated library code. The correct behavior is dispatched based on `os.Args[0]`, and
the `pinniped-server` binary is symlinked to `pinniped-concierge` and `pinniped-supervisor`.
- Strip debug symbols from our binaries. These aren't really useful in a distroless image anyway and all the
normal stuff you'd expect to work, such as stack traces, still does.
- Add a separate `pinniped-concierge-kube-cert-agent` binary with "sleep" and "print" functionality instead of
using builtin /bin/sleep and /bin/cat for the kube-cert-agent. This is split from the main server binary
because the loading/init time of the main server binary was too large for the tiny resource footprint we
established in our kube-cert-agent PodSpec. Using a separate binary eliminates this issue and the extra
binary adds only around 1.5MiB of image size.
- Switch the kube-cert-agent code to use a JSON `{"tls.crt": "<b64 cert>", "tls.key": "<b64 key>"}` format.
This is more robust to unexpected input formatting than the old code, which simply concatenated the files
with some extra newlines and split on whitespace.
- Update integration tests that made now-invalid assumptions about the `pinniped-server` image.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This may be a temporary fix. It switches the manual auth code prompt to use `promptForValue()` instead of `promptForSecret()`. The `promptForSecret()` function no longer supports cancellation (the v0.9.2 behavior) and the method of cancelling in `promptForValue()` is now based on running the blocking read in a background goroutine, which is allowed to block forever or leak (which is not important for our CLI use case).
This means that the authorization code is now visible in the user's terminal, but this is really not a big deal because of PKCE and the limited lifetime of an auth code.
The main goroutine now correctly waits for the "manual prompt" goroutine to clean up, which now includes printing the extra newline that would normally have been entered by the user in the manual flow.
The text of the manual login prompt is updated to be more concise and less scary (don't use the word "fail").
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This test is asynchronously waiting for the controller to do something, and in some of our test environments it will take a bit longer than we'd previously allowed.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
