Used this as an opportunity to refactor how some tests were
making assertions about error strings.
New test helpers make it easy for an error string to be expected as an
exact string, as a string built using sprintf, as a regexp, or as a
string built to include the platform-specific x509 error string.
All of these helpers can be used in a single `wantErr` field of a test
table. They can be used for both unit tests and integration tests.
Co-authored-by: Benjamin A. Petersen <ben@benjaminapetersen.me>
Also fix some tests that were broken by bumping golang and dependencies
in the previous commits.
Note that in addition to changes made to satisfy the linter which do not
impact the behavior of the code, this commit also adds ReadHeaderTimeout
to all usages of http.Server to satisfy the linter (and because it
seemed like a good suggestion).
- For backwards compatibility with older Pinniped CLIs, the pinniped-cli
client does not need to request the username or groups scopes for them
to be granted. For dynamic clients, the usual OAuth2 rules apply:
the client must be allowed to request the scopes according to its
configuration, and the client must actually request the scopes in the
authorization request.
- If the username scope was not granted, then there will be no username
in the ID token, and the cluster-scoped token exchange will fail since
there would be no username in the resulting cluster-scoped ID token.
- The OIDC well-known discovery endpoint lists the username and groups
scopes in the scopes_supported list, and lists the username and groups
claims in the claims_supported list.
- Add username and groups scopes to the default list of scopes
put into kubeconfig files by "pinniped get kubeconfig" CLI command,
and the default list of scopes used by "pinniped login oidc" when
no list of scopes is specified in the kubeconfig file
- The warning header about group memberships changing during upstream
refresh will only be sent to the pinniped-cli client, since it is
only intended for kubectl and it could leak the username to the
client (which may not have the username scope granted) through the
warning message text.
- Add the user's username to the session storage as a new field, so that
during upstream refresh we can compare the original username from the
initial authorization to the refreshed username, even in the case when
the username scope was not granted (and therefore the username is not
stored in the ID token claims of the session storage)
- Bump the Supervisor session storage format version from 2 to 3
due to the username field being added to the session struct
- Extract commonly used string constants related to OIDC flows to api
package.
- Change some import names to make them consistent:
- Always import github.com/coreos/go-oidc/v3/oidc as "coreosoidc"
- Always import go.pinniped.dev/generated/latest/apis/supervisor/oidc
as "oidcapi"
- Always import go.pinniped.dev/internal/oidc as "oidc"
To keep this backwards compatible, this PR changes how
the cli deals with ambiguous flows. Previously, if there
was more than one flow advertised, the cli would require users
to set the flag --upstream-identity-provider-flow. Now it
chooses the first one in the list.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
Go 1.18.1 started using MacOS' x509 verification APIs on Macs
rather than Go's own. The error messages are different.
Signed-off-by: Margo Crawford <margaretc@vmware.com>
- Two of the linters changed their names
- Updated code and nolint comments to make all linters pass with 1.44.2
- Added a new hack/install-linter.sh script to help developers install
the expected version of the linter for local development
Highlights from this dep bump:
1. Made a copy of the v0.4.0 github.com/go-logr/stdr implementation
for use in tests. We must bump this dep as Kube code uses a
newer version now. We would have to rewrite hundreds of test log
assertions without this copy.
2. Use github.com/felixge/httpsnoop to undo the changes made by
ory/fosite#636 for CLI based login flows. This is required for
backwards compatibility with older versions of our CLI. A
separate change after this will update the CLI to be more
flexible (it is purposefully not part of this change to confirm
that we did not break anything). For all browser login flows, we
now redirect using http.StatusSeeOther instead of http.StatusFound.
3. Drop plog.RemoveKlogGlobalFlags as klog no longer mutates global
process flags
4. Only bump github.com/ory/x to v0.0.297 instead of the latest
v0.0.321 because v0.0.298+ pulls in a newer version of
go.opentelemetry.io/otel/semconv which breaks k8s.io/apiserver.
We should update k8s.io/apiserver to use the newer code.
5. Migrate all code from k8s.io/apimachinery/pkg/util/clock to
k8s.io/utils/clock and k8s.io/utils/clock/testing
6. Delete testutil.NewDeleteOptionsRecorder and migrate to the new
kubetesting.NewDeleteActionWithOptions
7. Updated ExpectedAuthorizeCodeSessionJSONFromFuzzing caused by
fosite's new rotated_secrets OAuth client field. This new field
is currently not relevant to us as we have no private clients.
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the TLS config used by all pinniped components.
There are no configuration knobs associated with this change. Thus
this change tightens our static defaults.
There are four TLS config levels:
1. Secure (TLS 1.3 only)
2. Default (TLS 1.2+ best ciphers that are well supported)
3. Default LDAP (TLS 1.2+ with less good ciphers)
4. Legacy (currently unused, TLS 1.2+ with all non-broken ciphers)
Highlights per component:
1. pinniped CLI
- uses "secure" config against KAS
- uses "default" for all other connections
2. concierge
- uses "secure" config as an aggregated API server
- uses "default" config as a impersonation proxy API server
- uses "secure" config against KAS
- uses "default" config for JWT authenticater (mostly, see code)
- no changes to webhook authenticater (see code)
3. supervisor
- uses "default" config as a server
- uses "secure" config against KAS
- uses "default" config against OIDC IDPs
- uses "default LDAP" config against LDAP IDPs
Signed-off-by: Monis Khan <mok@vmware.com>
This change updates the pinniped CLI entrypoint to prevent browser
processes that we spawn from polluting our std out stream.
For example, chrome will print the following message to std out:
Opening in existing browser session.
Which leads to the following incomprehensible error message from
kubectl:
Unable to connect to the server: getting credentials:
decoding stdout: couldn't get version/kind; json parse error:
json: cannot unmarshal string into Go value of type struct
{ APIVersion string "json:\"apiVersion,omitempty\"";
Kind string "json:\"kind,omitempty\"" }
This would only occur on the initial login when we opened the
browser. Since credentials would be cached afterwards, kubectl
would work as expected for future invocations as no browser was
opened.
I could not think of a good way to actually test this change. There
is a clear gap in our integration tests - we never actually launch a
browser in the exact same way a user does - we instead open a chrome
driver at the login URL as a subprocess of the integration test
binary and not the pinniped CLI. Thus even if the chrome driver was
writing to std out, we would not notice any issues.
It is also unclear if there is a good way to prevent future related
bugs since std out is global to the process.
Signed-off-by: Monis Khan <mok@vmware.com>
After merging the new Kube 1.22 ExecCredential changes from main into
this feature branch, some of the new units test on this feature branch
needed to be update to account for the new ExecCredential "interactive"
field.
- Add `AllowPasswordGrant` boolean field to OIDCIdentityProvider's spec
- The oidc upstream watcher controller copies the value of
`AllowPasswordGrant` into the configuration of the cached provider
- Add password grant to the UpstreamOIDCIdentityProviderI interface
which is implemented by the cached provider instance for use in the
authorization endpoint
- Enhance the IDP discovery endpoint to return the supported "flows"
for each IDP ("cli_password" and/or "browser_authcode")
- Enhance `pinniped get kubeconfig` to help the user choose the desired
flow for the selected IDP, and to write the flow into the resulting
kubeconfg
- Enhance `pinniped login oidc` to have a flow flag to tell it which
client-side flow it should use for auth (CLI-based or browser-based)
- In the Dex config, allow the resource owner password grant, which Dex
implements to also return ID tokens, for use in integration tests
- Enhance the authorize endpoint to perform password grant when
requested by the incoming headers. This commit does not include unit
tests for the enhancements to the authorize endpoint, which will come
in the next commit
- Extract some shared helpers from the callback endpoint to share the
code with the authorize endpoint
- Add new integration tests
At a high level, it switches us to a distroless base container image, but that also includes several related bits:
- Add a writable /tmp but make the rest of our filesystems read-only at runtime.
- Condense our main server binaries into a single pinniped-server binary. This saves a bunch of space in
the image due to duplicated library code. The correct behavior is dispatched based on `os.Args[0]`, and
the `pinniped-server` binary is symlinked to `pinniped-concierge` and `pinniped-supervisor`.
- Strip debug symbols from our binaries. These aren't really useful in a distroless image anyway and all the
normal stuff you'd expect to work, such as stack traces, still does.
- Add a separate `pinniped-concierge-kube-cert-agent` binary with "sleep" and "print" functionality instead of
using builtin /bin/sleep and /bin/cat for the kube-cert-agent. This is split from the main server binary
because the loading/init time of the main server binary was too large for the tiny resource footprint we
established in our kube-cert-agent PodSpec. Using a separate binary eliminates this issue and the extra
binary adds only around 1.5MiB of image size.
- Switch the kube-cert-agent code to use a JSON `{"tls.crt": "<b64 cert>", "tls.key": "<b64 key>"}` format.
This is more robust to unexpected input formatting than the old code, which simply concatenated the files
with some extra newlines and split on whitespace.
- Update integration tests that made now-invalid assumptions about the `pinniped-server` image.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This flag is (for now) meant only to facilitate end-to-end testing, allowing us to force the "manual" login flow. If it ends up being useful we can un-hide it, but this seemed like the safest option to start with.
There is also a corresponding `--oidc-skip-listen` on the `pinniped get kubeconfig` command.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
This is a more restrictive library interface that more closely matches the use cases of our new form_post login flow.
Signed-off-by: Matt Moyer <moyerm@vmware.com>
Joshua Casey